Released 2012-11-22
0001312: [CAN] Change interrupt flags to IRQF_TRIGGER_LOW | IRQF_ONESHOT to prevent mcp2515 from stop receiving from can bus
0001430: [Touch driver] Add FocalTech FT5x06 series Controller
2 issues View Issues
0005280: [Display] [i.MX6] Weston does not work correctly when using chvt with use-g2d in weston.ini
0006232: [Buildroot] Update fsimx6 boards to Buildroot 2024.01
2 issues View Issues
0006111: [Buildroot] Update fsimx6sx boards to Buildroot 2024.01
1 issue View Issues
0006033: [Buildroot] Update fsimx6ul boards to Buildroot 2023.02
1 issue View Issues
0006008: [Buildroot] Add F&S Kernel and U-Boot versioning
0006009: [Buildroot] Add F&S psplash bootscreen
0006007: [Buildroot] Update IMX specific packages to NXP Yocto version lf-5.15.71-2.2.1
0006006: [Buildroot] Update to Buildroot 2023.02.6
4 issues View Issues
0005571: [General] Improve fsimx8mm install script
0005570: [General] Add picocoremx8mmr2 device trees
2 issues View Issues
0005170: [Buildroot] Add error handling for the install script with eMMC
0005329: [Buildroot] Add TSC2004 Touchscreen default calibration
0005330: [Buildroot] Add wlan regulatory.db to imx6/7 defonfigs
0005268: [Buildroot] Bump busybox from 1.33.0 to 1.33.2
0005327: [Buildroot] Update Buildroot to buildroot-2021.02.10
0005169: [Buildroot] Improve support for current buildroot version for platform fsimx7ulp
0005168: [Buildroot] Improve support for current buildroot version for platform fsimx6sx/fsimx6ul
7 issues View Issues
0005171: [Buildroot] Add support for board efusA9r2
1 issue View Issues
0005114: [Buildroot] Update history file to buildroot-2021.02.2-fsimx6-B2021.10.1
1 issue View Issues
0005113: [Buildroot] Update history file to buildroot-2021.02.2-fsimx6-B2021.10
0005112: [Buildroot] Add bulding of install.scr script with buildroot
0005111: [Buildroot] Fix imx6 alsa sound
0005110: [Buildroot] Add default touchscreen calibration SX8654
0005109: [Buildroot] Add experimental fsimx6 etnaviv defconfig
0005108: [Buildroot] Add building of emmc-sysimg for fsimx6
0005107: [Buildroot] Add fsimx6 Uboot building with Buildroot
0005106: [Buildroot] Add g2d support to weston
0005105: [Buildroot] Add xwayland defconfig
0005104: [Buildroot] Improve imx-gpu arm32 packages
0005103: [Buildroot] Improve imx6 defconfigs
0005102: [Buildroot] Add BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_PCIEUSB8997 for fsimx6* configs
0005101: [Buildroot] Improve fsimx6sx* defconfigs to support new device tree vand3
0005100: [Buildroot] Improve fsimx6ul* defconfigs to support new device tree gar3
14 issues View Issues
0005256: [Buildroot] Improve support for fsimx6ul* defconfigs
1 issue View Issues
0005058: [Buildroot] Merge Original buildroot-2020.011
0005099: [Buildroot] Update history file to buildroot-2021.02.2-fsimx8mm-B2021.06
0005098: [Buildroot] Fixup History File
0005097: [Buildroot] Improve sysimg (sdcard image) generation
0005096: [Buildroot] Improve fsimx8mm defconfigs
0005095: [Buildroot] Fix imx-gstreamer package
0005094: [Buildroot] Fix old hashes
0005093: [Buildroot] Update bluez_utils package
0005092: [Buildroot] Merge Original buildroot-2021.02.2
0005091: [Buildroot] Merge Original buildroot-2021.02.1
0005090: [Buildroot] Update imx specific packages
0005089: [Buildroot] Update fsimx8mm_wayland_defconfig
0005088: [Buildroot] Merge Original buildroot-2021.02
0005087: [Buildroot] Update to libopenssl-1.1.1k
0005086: [Buildroot] fsimx6{sx,ul}_min_defconfig: Correctly load SDMA firmware
0005085: [Buildroot] Fix: busybox 1.33
0005084: [Buildroot] Change: Several files that make the previous features available
0005082: [Buildroot] Add: preinit.sh
0005081: [Buildroot] Change: system.conf for rauc
0005080: [Buildroot] Add: Support for automatic update via usb drive or sd card
0005078: [Buildroot] Change: Config
0005079: [Buildroot] Add: board/f+s/common/rauc
0005077: [Buildroot] Remove: postinstall.sh
0005076: [Buildroot] Change: Path of default certificate changed
0005074: [Buildroot] Remove: S51rauc
0005073: [Buildroot] Change: Add emmc fallback support fw_env.conf.mmc
0005072: [Buildroot] Change: Increase partition number of data partition (emmc)
0005071: [Buildroot] Change: Extend demo application with startup script
0005070: [Buildroot] Extend: dynamic_mounting.py
0005069: [Buildroot] RAUC Update to 1.5
0005068: [Buildroot] Fix RAUC squashfs mounting
0005067: [Buildroot] Fixes for FS-Update
0005066: [Buildroot] Add FS-Updater for application and rootfs
0005065: [Buildroot] Fix cpio-rootfs generation
0005064: [Buildroot] Fix padding of lpddr4 ram trainigs binaries
0005063: [Buildroot] Improve fsimx8mm weston backend
0005062: [Buildroot] Improve imx8 image generation
0005061: [Buildroot] Update fsimx8mm defconfigs and busybox
0005060: [Buildroot] Update arm trusted firmware
0005059: [Buildroot] Update imx specific packages
0005057: [Buildroot] Merge Original buildroot-2020.08
0005039: [Buildroot] Merge Original buildroot-2020.05
0005038: [Buildroot] Merge buildroot-2020.02
0005037: [Buildroot] Merge Original buildroot-2019.11
0005036: [Buildroot] Merge Original buildroot-2019.08
0005035: [Buildroot] Folder bug fix for FS Updater FSIMX8MM
0005034: [Buildroot] Add FS Updater Solution scripts for FSIMX8MM architecture
0005033: [Buildroot] Add FS Updater package
0005032: [Buildroot] Latest Buildroot version of rauc
0005031: [Buildroot] Add packages and utillity for python-azure-iot-device
50 issues View Issues
0004976: [Buildroot] Move entry to create install script for fsimx8mm
0004975: [Buildroot] Enable 2D support for 64-bit architecture
0004974: [Buildroot] Set PKG_CONFIG_SYSROOT_DIR to the build process
0004973: [Buildroot] Enable FW images for iMX8MM plattform
0004972: [Buildroot] Add config entries for iMX8MQ and iMX8MM
0004971: [Buildroot] Bump imx-vpu-hantro to 1.14
0004970: [Buildroot] Improve libdrm settings
0004969: [Buildroot] Add install script for fsimx8mm
0004968: [Buildroot] Bump mkimage to imx_4.14.98_2.3.0
0004967: [Buildroot] Bump uuc for ramfs default configuration
0004966: [Buildroot] Bump kobs-ng to support iMX8M(M,N)
0004965: [Buildroot] Add udev rules to create touchscreen device
0004964: [Buildroot] Add minimal configuration for fsim8mm with ramfs
0004963: [Buildroot] Add configurations to build fsimx8mm with mmc support
0004962: [Buildroot] Add minimal configuration for fsimx8mm
0004961: [Buildroot] Improve fsimx8mm support
0004377: [Buildroot] Add support for fsimx8mm
17 issues View Issues
0004380: [General] [i.MX6UL] Create PicoCOMA7 release
1 issue View Issues
0004395: [General] Create PicoCoreMX6UL release to support eMMC as boot device
1 issue View Issues
0004395: [General] Create PicoCoreMX6UL release to support eMMC as boot device
1 issue View Issues
0004380: [General] [i.MX6UL] Create PicoCOMA7 release
1 issue View Issues
0004153: [Buildroot] [i.MX7ULP] Add support for fsimx7ulp_qt5_weston_defconfig
0004154: [Buildroot] Add default weston.ini file
2 issues View Issues
0004061: [Buildroot] Replace gstreamer package with imx-gstreamer package
0003952: [Buildroot] Add support for MWIFIEX_SDSD8997_WLAN/BT
0003951: [Buildroot] FSIMX7ULP: Check if xserver can be used with current version
3 issues View Issues
0003925: [Buildroot] Add support for firmware Marvell 88W8997
0003785: [Buildroot] Update Buildroot to 2018.11
0003784: [Buildroot] Update Buildroot to 2018.08
0003788: [Buildroot] Update to newest NXP kernel 4.9.x
0003791: [Buildroot] Add support for Sterling WLAN chip
0003790: [Buildroot] tslib causes X-Server to crash
0003789: [Buildroot] F&S standard Qt5 rootfs is huge and does not fit in NAND
0003776: [Buildroot] Update Buildroot to 2016.08
0003783: [Buildroot] Update Buildroot to 2018.05
0003782: [Buildroot] Update Buildroot to 2018.02
0003781: [Buildroot] Update Buildroot to 2017.11
0003780: [Buildroot] Update Buildroot to 2017.08
0003779: [Buildroot] Update Buildroot to 2017.05
0003778: [Buildroot] Update Buildroot to 2017.02
0003777: [Buildroot] Update Buildroot to 2016.11
15 issues View Issues
0003775: [Buildroot] Add support for Silex QCA9377 WLAN/Bluetooth to Buildroot
1 issue View Issues
0003765: [Buildroot] Add support for Cube2.0 to Buildroot
0003792: [Buildroot] Add support for fsimx7ulp architecture to Buildroot
0003773: [Buildroot] Some device trees for F&S boards are not built
0003764: [Display] Add support for Wayland/Weston
0003774: [Bluetooth] Add xrandr to F&S configs to allow minimal display rotation
0003769: [Buildroot] Add wget to F&S boards
0003766: [Buildroot] Add virtual keyboard to Matchbox WM
0003772: [Buildroot] /etc/init.d/S35x11 always starts X11 even if no framebuffer is available
0003771: [Bluetooth] Buildroot has busybox-1.24.x, but F&S defconfig for busybox is still 1.23.x
0003770: [Buildroot] In the rootfs there appear some paths from the build host
0003767: [Buildroot] If no login_tty is given syslog grows rapidly
11 issues View Issues
0003763: [Buildroot] Clean up F&S defconfigs
0003762: [Buildroot] The download sequence for CubeA7UL does not work
2 issues View Issues
0003761: [Buildroot] Final fixes before release
1 issue View Issues
0003590: [Buildroot] Have a Qt5 configuration for fsimx6
0003589: [Buildroot] Handle new device tree names for F&S boards and modules
0003588: [Buildroot] Update Buildroot to buildroot-2016.05
0003587: [Buildroot] Use gstreamer-1.x on fsimx6
0003586: [Buildroot] Switch fsimx6 to kernel 4.1.15 using device trees
0003585: [Bluetooth] Add support for cubeA7UL
0003584: [Buildroot] Switch to newer toolchain based on gcc-5.x
0003583: [Buildroot] Support Media Transfer Protocol (MTD)
0003582: [Buildroot] Update Buildroot to buildroot-2016.02
0002706: [Buildroot] Merge own build process for Linux kernel (localdir) with the one of regular buildroot
0001847: [Display] Add DRI support to enable EGL rendering in X11
0003581: [Buildroot] Package ncurses-5.9 fails to build with gcc-5.x
12 issues View Issues
First version for i.MX6 SoloX
0003580: [Buildroot] Option -mach=armv7-a generates compiler warnings
0003069: [Buildroot] Re-organize final scripts for F&S boards
0003070: [Buildroot] Add support for i.MX6 SoloX (fsimx6sx)
0003071: [Buildroot] Add proper GPU support for i.MX6 SoloX
0003068: [Buildroot] /etc/profile.d is a regular file instead of a directory
0003067: [Buildroot] Update Buildroot to buildroot-2015.11.1
6 issues View Issues
0003064: [Buildroot] Switch default touch support from tslib to evdev on fsimx6
0003063: [Buildroot] Update to busybox-1.23.x on F&S boards
0003577: [Buildroot] 3D graphics and video playback do not work on kernel 3.0.35
0003576: [Buildroot] Keys for ssh are computed even if rootfs is read-only
0003062: [Buildroot] gst-fsl-plugins do not work in buildroot-2015.05 on fsimx6
0003061: [Buildroot] Fix defconfig problems when building Linux kernel
0002701: [Buildroot] Update Buildroot to 2015.05
0002700: [Buildroot] Update Buildroot to 2015.02
0002699: [Buildroot] Update Buildroot to 2014.11
0002698: [Buildroot] Update Buildroot to 2014.08
0002697: [Buildroot] Update Buildroot to 2014.05
11 issues View Issues
First release for i.MX6 UltraLite
0003066: [Buildroot] Add support for i.MX6 UltraLite (fsimx6ul)
0003579: [Buildroot] libpng fails to build under Buildroot
0003065: [Buildroot] Update buildroot to buildroot-2015.08.1
0003060: [Buildroot] Midori compilation fails in buildroot-2014.xx
0002666: [Buildroot] Pango and cairo compilation fails because of a bad libtool file (.la)
0002653: [Touch driver] X-Server crashes when tslib accesses /dev/input/event1
0002651: [Buildroot] Package x11r7/xdriver_xf86-input-tslib fails to download
0003059: [Buildroot] Fix tslib crash with unknown xf86XInputSetScreen
0003058: [Buildroot] Fix download site for xdriver_xf86-input-tslib
0002709: [Buildroot] Add support for HGATEWAY board rev. 1.10
10 issues View Issues
0002705: [Buildroot] Change Linux compilation to use output/build/linux-localdir
0002708: [Buildroot] libfslcodec and libfslparser don't work on fsimx6
0002707: [Buildroot] Add generic fsimx6_std_defconfig and fsimx6_min_defconfig
0002038: [Buildroot] Join i.MX6 BuildRoot with Multi-Platform-Linux
0002704: [Buildroot] Add useful alias commands like ll for ls -l, etc.
0002703: [Buildroot] Switch to busybox-1.22
0002702: [Buildroot] Add support for HGATEWAY
0002696: [Buildroot] Update Buildroot to 2014.02
0002695: [Buildroot] Update Buildroot to 2013.11
0002694: [Buildroot] Update Buildroot to 2013.08
0002693: [Buildroot] Update Buildroot to 2013.05
11 issues View Issues
New NAND flash driver, block refresh, new boot strategies, Ethernet improvements
0002295: [Buildroot] Allow Linux compilation from a local directory
0002294: [NAND-FMD] Change UBI LEB size to 0x1f000 for new NAND driver on Vybrid
0002118: [Audio] Add alsa to gstreamer-plugins-good
0002195: [General] Use login_tty as provided by /sys/bdinfo in BuildRoot
4 issues View Issues
0001469: [Production/Installation] OpenSSH key generation fails because root filesystem is read-only
0002028: [Buildroot] Qt download site has changed
0002027: [Buildroot] Move F&S specific configuration files to the subdirectories
0002026: [Buildroot] Add support for CUBEA5
0002029: [Touch driver] Calibration sometimes fails
5 issues View Issues
0002025: [Buildroot] Merge BuildRoot for fsvybrid and Multi-Platform-Linux
0002024: [Serial Driver/Interface] root can not login on PicoCOMA5
0002023: [Buildroot] Use single toolchain
0002022: [Buildroot] Add mcc_pingpong
0002021: [Buildroot] Add support for mqxboot
0002020: [Buildroot] Add generic support for MCC and MQX
0002019: [General] Create link for lib/ld-linux.so.3 if required
0001582: [Cross-Toolchain] Switch to new fs-toolchain-4.7.2 and gdb-7.4.x
8 issues View Issues
0001866: [Tool/Utility] Add xinput-calibrator application
1 issue View Issues
0001842: [Kernel] Integrate release version modules into rootfs image
0001846: [Display] Add X11 display driver
0001840: [Buildroot] blackbox window manager causes "Segmentation fault"
3 issues View Issues
0001744: [Display] Add directFB support
0001823: [Buildroot] Update to imx-lib version 3.0.35-4.0.0
0001805: [gstreamer] Add hw accelerated video processing support (VPU) and freescale specific gstreamer plugins
0001820: [gstreamer] fsllibs required by gstreamer are not available in library path
0001803: [General] Update to buildroot 2013.05
5 issues View Issues
0001467: [Buildroot] Create and release first Buildroot package for FS-i.MX6 platforms (QBlissA9)
1 issue View Issues
Released 2012-11-22
0001332: [General] Move board-specific files from target/device/f+s to board/f+s
0001331: [General] Rebase BuildRoot to version 2012.08
0001306: [General] Added PicoCOM4, PicoMOD7A and NetDCU14
0001303: [Display] Add VNC server for X11 display.
0001295: [General] Add GDB Server
0001284: [Display] Configure Xorg for Samsung Touch
0001291: [NAND-FMD] Add busybox tools to access MTD
0001292: [General] Add SSH (OpenSSH)
0001285: [Display] Can not run X applications in default configuration
0001308: [General] Add HDMI to PicoMOD7A
0001286: [Display] Touch: Xorg calibration reports 'Mis-click detected'
11 issues View Issues
Ist für alle iMX93 basierte boards. Der Tag ist solange zu benutzen, bis der Boardsupport eigenständig geführt wird.
Zu löschen bei Merge in den F&S Main branch.
0006470: [Kernel] Driver rtc-85263.c is not-selected/deprecated and can be replaced with rtc85363.c
1 issue View Issues
0006522: [Kernel] [FSIMX8MM] Fix pwm frequency for pca963x
0006521: [Kernel] [FSIMX8MM] Fix basler support for fsimx8mm
0006520: [Kernel] [FSIMX8MM] Update version of PCoreBBDSI for fsimx8mm
0006519: [Kernel] [OSM8MM] Handle backlight control better for OSM8MM
0006518: [Kernel] [OSM8MM] Use bitbanging for SPI_A on ADP-OSM-BB
0006517: [Kernel] Add support for OSM8MM
6 issues View Issues
0006463: [Kernel] Add support for armStoneMX8MP Rev 110
1 issue View Issues
Pre-Release für PicoCoreMX93 und OSM93 abgeschlossen
0006426: [Kernel] OSM93: Adjust device tree for the BT070L1060CS0I1AD-A
0006425: [Kernel] Improve fsimx93_defconfig
0006424: [Kernel] Improve support for EE1010B1T-1CP display
0006423: [Kernel] Add support for ee0350et-2cp display
0006422: [Kernel] Improve BT070L1060CS0I1AD-A display support
0006421: [Kernel] Remove support for display j070wvtc0211
0006420: [Kernel] Improve the indentation in Makefile
0006419: [Kernel] Improve support for picocoremx93
8 issues View Issues
0006304: [Kernel] [FSIMX8MP] HDMI+LVDS whitout LVDS connected leads to endless loop while booting
0005998: [Ethernet] [i.MX8MP] picocoremx8mpr2.dts eqos not configured corretly
0006266: [Kernel] [ALL] DTS: ecspi fsl,spi-num-chipselects is deprecated use num-cs
0005897: [Audio] [i.MX8MP] SGTL5000 is not working after deep sleep
0006265: [Kernel] [ALL] It is not possible to read data from serial port when input buffer contains exactly 9 bytes.
0006129: [Kernel] [PCore8MP] Wrong DSP reserved_mem address for boards with less than 2GB dram
0005898: [Display] [efusMX8MP] SPI-NAND is not working correctly
0006354: [Kernel] [fsimx8mp] Improve Cortex-M support
0006118: [Kernel] [FSIMX8MP] Add BT070L1060CS0I1AD-A display support to FSSMMX8MP
0006117: [Kernel] [FSIMX8MP] lvds pixelclock is hardcoded to 37125 kHZ
0006353: [Kernel] Apply patches from kernel mainline version 5.15.160
11 issues View Issues
0006230: [Kernel] Update fsimx6 boards to kernel 5.15
0006231: [Kernel] Use common dtsi files for efus and armstone boards
2 issues View Issues
0006193: [Kernel] Add display support for BT070L1060CS0I1AD on PicoCoreMX6UL100
1 issue View Issues
0006162: [U-Boot] arm:mach-imx:imx9: Initialize lpuart2 root clock
0006163: [U-Boot] Add board support for fsimx93
0006164: [U-Boot] common: Impvore usb_storage for usb devices
0006165: [U-Boot] Correct copyright message
0006166: [U-Boot] Improve picocoremx93 device tree
0006161: [U-Boot] arm:dts:imx93: Add a per clock for lpuart2
0006181: [Kernel] dts:F+S:picocoremx93: complete BT070L1060CS0I1AD-A for ADP-LVDS2LVDS1
0006180: [Kernel] drivers:input:touchscreen:goodix: configure interrupt direction
0006179: [Kernel] arch:arm64:dts:f+s: add picocoremx93-adp-lvds2lvds2-EE1010B1T-1CP
0006178: [Kernel] arch:arm64:dts:f+s:picocoremx93: enable epxp node
0006177: [Kernel] arch:arm64:configs: Add default configuration for fsimx93
0006171: [Kernel] rtc: Add rtc pcf85263 driver
0006170: [Kernel] char: Add bdinfo driver
0006169: [Kernel] arch:arm64:dts:f+s: Add device tree support for picocoremx93
0006168: [Kernel] clock: Improve binding clock definitions for imx93
0006167: [Kernel] arch:arm64:dts:freescale: Improve imx93.dtsi
0006172: [Kernel] leds: Add leds-pca963x-fus driver
0006173: [Kernel] spi: Improve spidev driver
0006174: [Kernel] input:touch:focaltech: Improve focaltech touch driver
0006175: [Kernel] Add support to use fsversion
0006176: [Kernel] gpu:drm:bridge: Add F+S version of sn65dsi84-dsi2lvds driver
21 issues View Issues
0006187: [Kernel] Update fsimx8mn to Kernel 5.15
0006188: [Kernel] Add display support for BT070L1060CS0I1AD
0006186: [Kernel] Apply patches from mainline linux-5.15.148
3 issues View Issues
0006115: [Kernel] Update fsimx6sx boards to kernel 5.15
0004430: [Kernel] Improve LVDS display support on fsimx6/sx/ul
0004035: [Kernel] PicoComA9X device-tree UART_A_RTSCTS define
0004142: [Kernel] [i.MX6SX] The auxcore-driver does not load when the Uboot variable reserved_ram_size is not set
4 issues View Issues
0006028: [Kernel] Update fsimx6ul boards to kernel 5.15
1 issue View Issues
0006003: [General] Use build system neutral release tags
1 issue View Issues
0005981: [Kernel] Don't use nand-on-flash-bad block table for fsimx8mm
0005980: [Kernel] Add DTS version for fsimx8mm
0005979: [Kernel] Use new naming convention for PicoCoreMX8MM boards
0005978: [Kernel] Apply patches from mainline linux-5.15.131
0005896: [Audio] [i.MX8MP] HDMI audio is not working
0005895: [Ethernet] Ethernet breaks when both phys are up but only one connected
6 issues View Issues
0005732: [Kernel] [aStoneMX8MP] Audio 44100Hz not supported
0005843: [Kernel] The bdinfo driver gives wrong hexvalues for multiple reads on the same file
0005827: [Kernel] [PCoreMX8MM/MN] GPIO5_IO17 is muxt wrong in the DTS
0005899: [Kernel] Update do Kernel 5.15.71
0005902: [Kernel] Add F&S Versioning for kernel and device tree
0005910: [Kernel] Fix picocoremx8mp Bluetooth error after suspend-to-mem
0005909: [Kernel] Add support to disable pin controls nodes in the device tree
0005908: [Kernel] Improve SDIO stability for Azurewave wlan chips
0005907: [Kernel] Improve fsimx8m variants uart clock speed
0005906: [Kernel] Add ast-adp-edt2 adapter support for efusmx8mp
0005905: [Kernel] Add imx8mp basler isp camera support
0005904: [Kernel] Add leds-pca963x-fus driver and revert the original to the mainline drive
0005903: [Kernel] Improve uart dma support
0005337: [Kernel] Add support for power on/off key
14 issues View Issues
0005762: [Kernel] Improve bdinfo driver
1 issue View Issues
0005676: [Kernel] thermal/core: Add NULL pointer check before using cooling device stats
0005675: [Kernel] thermal/drivers/cpufreq_cooling: Update cpufreq_state only if state has changed
0005674: [Kernel] thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()
0005673: [Kernel] thermal: core: Reset previous low and high trip during thermal zone init
0005672: [Kernel] thermal/core: Correct function name thermal_zone_device_unregister()
0005670: [Kernel] thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
0005669: [Kernel] thermal:imx8mm:Improve imx8mm_thermal driver
0005668: [Kernel] Add picocorem8mp(r2)-adp-aud1 device trees for ADP-AUD1
8 issues View Issues
Released by Anatol Derksen
0005641: [Kernel] Improve picocoremx8mp.dtsi
0005640: [Kernel] Improve armstonemx8mp.dtsi
0005639: [Kernel] [fsimx8mp]: Add aliases for spi_a/b
0005638: [Kernel] Improve lvds display timings for picocoremx8mp(r2)
0005636: [Kernel] Add g133han01 lvds display support for picocoremx8mp(r2)
0005637: [Kernel] Improve picocoremx8mpr2 g133han01 display
0005635: [Kernel] mmc: sdhci-esdhc-imx: disable CMDQ support
0005634: [Kernel] Change fsimx8mp aliases for fec and eqos.
0005633: [Kernel] Add support for picocoremx8mpr2
0005632: [Kernel] Rework device tree support for picocoremx8mp
0005631: [Kernel] Correct define names in armstonemx8mp device tree include file
0005630: [Kernel] Improve lvds display timings for armstonemx8mp
0005629: [Kernel] MLK-25498 gpu: drm: imx: Add missing PHY init to cdns_mhdp_imx_resume
0005628: [Kernel] Add support for armstonemx8mp
14 issues View Issues
0005516: [Kernel] By default spread spectrum support is disabled on RTL8211F
1 issue View Issues
0005572: [Kernel] Merge tag 'fsimx8mm-Y2021.04.2' into HEAD
1 issue View Issues
0005550: [General] Improve picocoremx8mmr2 device tree
0005549: [General] Improve realtek driver
0005548: [General] Support more features for Realtek PHY
3 issues View Issues
0003924: [Kernel] Add support for MIPI-DSI display for PicoCoreMX7ULP
0005398: [Kernel] Improve fbdev mipi_dsi_northwest driv
0005397: [Kernel] Improve the EE0350ET-2CP driver for fbdev
0005396: [Kernel] Improve picocoremx7up device tree
0005395: [Kernel] Fix backlight polarity for rgt070qyh-13c
5 issues View Issues
0005314: [Kernel] Fix picocoremx6ul100 DTS
0005313: [Kernel] Fix picocoma7 device tree
0005312: [Kernel] Fix rtc-pfc856063 driver
0005311: [Kernel] Fix imx6sx/ul device tree pathes for backwards compatibility
0005144: [Kernel] Disable dma for a specific UART Port by DTS does not work anymore
0005135: [General] CPU Freq governor is set to "performance" by default.
0005287: [Kernel] Boot hangs on i.MX6SX CPUs without GPU on kernel 5.4.70
0005149: [Kernel] Support for Display EE0350ET with Touchcontroller atmel
0005250: [Kernel] Improve support for platform fsimx7ulp due to kernel update
0005249: [Kernel] Add display support (ee0350et-2cp) for target fsimx7ulp
0005248: [Kernel] Improve edt-ft5x06 touch driver - prevent bogus data on first register access
0005247: [Kernel] Add fsimx6sx/ul alias for gpmi/emmc/rpmsg
0005246: [Kernel] Correct the clock source for mclk0
0005118: [NAND-FMD] The gpmi-nand-fus driver computes the eec byte sitze wrong
14 issues View Issues
0005310: [Kernel] Fix i2c frequency entry in device trees
0005309: [Kernel] Add support for TSC2004 on fsimx6ul
0005308: [Kernel] Add support for picocoremx6ul100 on architecture fsimx6ul
0005307: [Kernel] Improve support for picocoremx6ul revision 1.20
0005306: [Kernel] Add full device-tree support for PicoCOMA7
0005305: [Kernel] Add driver for lontium-lt9211 RGB2LVDS converter
0005304: [Kernel] Add support for RTC PCF85263
7 issues View Issues
0005251: [Kernel] Add support for board efusA9r2
1 issue View Issues
0005244: [Kernel] Enable USB Type-C for picocoremx8mn-lpddr4
0005243: [Kernel] Improve tsc200x-core touchscreen driver
0005242: [Kernel] Improve display support for platform fsimx8mm/fsimx8mn
3 issues View Issues
0004825: [General] [Qblissa9r2q] Board hangs when loading GPU driver
1 issue View Issues
0005241: [Kernel] Add support for etnaviv support on platform fsimx6
0005239: [Kernel] Improve support for platform fsimx6 due to kernel update
0005240: [Kernel] Improve support for qblissA9/r2
0005238: [Kernel] Add support for display ee0350et-2cp on platform fsimx8mp
4 issues View Issues
0005237: [Kernel] Improve dmaengine imx-sdma raise up channel0 priority after resume
0005236: [Kernel] Change naming for device trees of PicoCoreMX8MM_MN_Mx
0005235: [Kernel] Improve support for target fsimx8mn - USB-C, Display
0005234: [Kernel] Improve architecture fsimx6 PCIe setup
0005233: [Kernel] Improve support for picocom1.2 - UART configuration
0005232: [Kernel] Add support for picocoremx6ul revision 1.20
0005230: [Kernel] Add support for picocoremx6ul100 on platform fsimx6ul
0005229: [Kernel] Add full device-tree support for PicoCOMA7
0005228: [Kernel] Add Cortex-M7 support for platform fsimx8mp
0005227: [Kernel] Improve support for platform fsimx8mp
0005226: [Kernel] Add and improve display support for platform fsimx8mm
11 issues View Issues
0005255: [Kernel] Improve support for picocom1.2 - UART configuration
0005254: [Kernel] Add support for picocoremx6ul100 on platform fsimx6ul
0005253: [Kernel] Add full device-tree support for PicoCOMA7
0005252: [Kernel] Add support for picocoremx6ul revision 1.20
4 issues View Issues
0004582: [General] i.MX8MM Industrial CPUs with a critical temperature of 105C shut down at 95C
0005221: [Kernel] Fix picocoremx8mm/mx8mx pcie
2 issues View Issues
0005220: [Kernel] Improve device tree for F&S standard panel
1 issue View Issues
0005219: [Kernel] Add support for target fsimx8mp
0005218: [Kernel] Improve support for platform fsimx8mm - BT/Audio
2 issues View Issues
0005217: [Kernel] Improve drivers/rtc/systohc.c
0005216: [Kernel] Improve atmel_mxt_ts.c touch
0005215: [Kernel] Improve configuration for platform fsimx8mm
0005214: [Kernel] Improve support for ksz ethernet switches
0005213: [Kernel] Improve graphic and backlight support
0005212: [Kernel] Add support for CAN-FD chip MCP251xfd
0005211: [Kernel] Fixup device-trees for platform fsimx8mm/fsimx8mn
0005210: [Kernel] Improve display support for fsimx8m/fsimx8mm/fsimx8m
0005209: [Kernel] Improve support for platform fsimx8mn
9 issues View Issues
0005208: [Kernel] Add support for KSZ9893 ETH switch
0005207: [Kernel] Improve support for platform fsimx8mm
0005206: [Kernel] Fix audio clock settings in armstonea9qdl.dtsi
0005205: [Kernel] Improve display support for fsimx8m/fsimx8mm/fsimx8m
0005204: [Kernel] Fixup for kernel upgrade to 5.4.24
0005203: [Kernel] Update kernel to version 5.4.24
0004598: [Kernel] Backlight flickers from backlight off to value !=0
0004596: [Kernel] The initialization of CAN MCP251XFD doesn´t work all the time
0004514: [Kernel] Add support for RTC PCF85263
0004495: [Kernel] Add support for display NewVision NV3051D
0004376: [Kernel] Add support for panel sitronix ST7703
0004374: [RTC] Improve rtc-pcf85263 driver - clock generation
0004373: [CAN] Add support for MCP25XXFD chip
13 issues View Issues
0005030: [Kernel] Improve pmic regulator voltages for PicoCoreMX8MM
0005029: [Kernel] Improve fsimx8mm support
0005028: [Kernel] Update copyright messages in device trees
0005027: [Kernel] Improve support for g070y2-l01 panel (armStoneMX8M only)
0005026: [Kernel] Add support for j070wvtc0211 panel (armStoneMX8M only)
0005025: [Kernel] Improve clock calculation for NWL MIPI-DSI core
0005024: [Kernel] Add support for panel sitronix ST7703
0005023: [Kernel] Add support for PicoCoreMX8MX PCB
0005022: [Kernel] Improve rtc-pcf85263 driver - support generating output clock
0005021: [Kernel] Add support for MCP25XXFD
0005020: [Kernel] Add panel g185han01 support for armStoneMX8M
0005019: [Kernel] Merge NXP rel_imx_4.14.98_2.3.2_patch into master
0005018: [Kernel] Merge branch fsimx8mx-B2019.11-pre into master
13 issues View Issues
0004378: [General] [i.MX6UL] Create PicoCOMA7 release
1 issue View Issues
0004396: [General] Create PicoCoreMX6UL release to support eMMC as boot device
1 issue View Issues
0005225: [Kernel] Improve support for platform fsimx8mp - display, eth, DT
0005224: [Kernel] Improve support for architecture fsimx8mn
0005223: [Kernel] Add support for micrel phy on fsimx6sx_defconfig
0005222: [Kernel] Improve uart imx.c to disable dtrd
4 issues View Issues
0005017: [Kernel] Correct device tree support for picocoremx8mn
0005016: [Kernel] Add support for PicoCoreMX8MN
2 issues View Issues
0005014: [Kernel] Improve support for panel j070wvtc0211
0005013: [Kernel] Add PCF85063 to the fsimx8x_defconfig
0005012: [Kernel] Add support for MIPI-DSI panel rf3500d-ayw-mng1
0005011: [Kernel] Add support for F&S adp-mipi2lvds1 board with j070wvtc0211 panel
0005010: [Kernel] Merge NXP branch rel_imx_4.14.98_2.3.1_patch into fsimx8mx-B2019.11-pre
0005009: [Kernel] Merge NXP branch rel_imx_4.14.98_2.3.0 into fsimx8mx-B2019.11-pre
0005008: [Kernel] Improve device tree for PicoCoreMX8MM
0005007: [Kernel] Merge NXP branch imx_4.14.98_2.2.0 into fsimx8mx-B2019.11-pre
0005006: [Kernel] Add driver support to fsimx8m_defconfig
0005005: [Kernel] Improve device tree support for armStoneMX8M
0005004: [Kernel] Improve audio support for armStoneMX8M
0005003: [Kernel] Improve device tree support for picocoremx8mm
0005002: [Kernel] Merge branch rel_imx_4.14.98_2.1.0 into fsimx8mx-B2019.11-pre
0005001: [Kernel] Merge rel_imx_4.14.98_2.0.0_ga into fsimx8mx-B2019.11-pre
0005000: [Kernel] Improve imx-sgtl5000
0004999: [Kernel] Improve compiler warnings
16 issues View Issues
0004513: [Kernel] Remove debug messages in Vybrid NAND driver
0004512: [Kernel] Improve TI wireless support
0004511: [Kernel] Improve pwm-imx driver
0004510: [Kernel] Add support for adc ads1118
4 issues View Issues
0004213: [Kernel] [i.MX6UL] Add support for gar2 revision 1.10
0004243: [Display] [i.MX6UL] The lcd display does not work anymore
0004244: [I2C] [i.MX6UL] On GAR1 and GAR2 the default i2c speed is to fast
3 issues View Issues
0004212: [Kernel] [i.MX6SX]Cont1 device-tree is not available in arch/arm/boot/dts/Makefile
1 issue View Issues
0004179: [Display] [armStoneA9r2 ] LVDS backlight enabled too early in boot process
0004127: [NAND-FMD] Ubifs chrashes after resume from suspend
0004183: [Display] Videos can't be played if the camera is disabled in the device tree
0004206: [Kernel] [i.MX6-ALL] Add possibility to disable Direct Memory Access for imx-UARTvia device tree
0004222: [General] The lcd display does not work after git commit Add device tree property unblank_delay to mxc_ipuv3_fb.c
0004228: [Display] [picomod9] The LVDS-Display does not work after commit "Use meaningful framebuffer names im mxc_ipuv3_fb.c"
0004234: [Display] Add display support for endrich LCD-MI0700AJT
7 issues View Issues
0004998: [Kernel] Add support for inversion of x,y coordinates
0004997: [Kernel] Add audio support for SGTL5000
0004996: [Kernel] Add spidev support
0004995: [Kernel] Remove old display timings
0004994: [Kernel] Add DT support for board rev. 1.10
0004993: [Kernel] Add support for g050tan01 panel
0004992: [Kernel] Add dynamic calculation of pll pms
0004991: [Kernel] Add device tree support for DSI2LVDS panels
0004990: [Kernel] Add basic support for TC358764
0004989: [Kernel] Add IOMUX configuration for UART
0004988: [Kernel] Add CLKO2 support
0004987: [Kernel] Corrects some compatible strings
0004986: [Kernel] Add support for PicoCoreMX8MM
0004985: [Kernel] Add 'best-match' attribute to set precise clock
0004984: [Kernel] Add sn65dsi84 to default configuration
0004983: [Kernel] Add support for sn65dsi84
0004982: [Kernel] Add support for display panels
0004981: [Kernel] Add BDIInfo driver
0004980: [Kernel] Correct compatible string for USB3 nodes
0004979: [Kernel] Add support for armStoneMX8M
0004978: [Kernel] NXP Version rel_imx_4.14.78_1.0.0_ga
21 issues View Issues
0004155: [Kernel] Improve PicoCoreMX7ULP Device-Tree
0003956: [Kernel] QSPI support in linux for PicoCoreMX7ULP?
0004119: [Kernel] The USB-Device chrashes after a resume from suspend-to -ram
0004066: [Kernel] A7 cant't be woken up by the M4, when in powerstate standby on modul rev 1.2
0004136: [Buildroot] Add wayland defconfig for fsimx7ulp
0003955: [Kernel] Add sgtl5000 audio support for PicoCoreMX7ULP
0003950: [Kernel] Add support for PicoCoreMX7ULP revision 1.20
0003949: [Kernel] Add support for Azurewave CM276NF for PicoCoreMX7ULP
0003923: [Kernel] i.MX7ULP MIPI-DSI connection doesn´t work correctly
9 issues View Issues
0004157: [Kernel] Rework of all fsimx6sx device-trees for Release fsimx6sx-B2019.11
1 issue View Issues
0003883: [RTC] RTC does not work properly if not configured
0004167: [Kernel] imx6ull: VDD_SOC_CAP -> changed voltage from 1.175V to 1.25V
0004156: [Kernel] Rework of all fsimx6ul device-trees for Release fsimx6ul-B2019.11
3 issues View Issues
0004150: [Kernel] PCIe support does not work correct
0004184: [Camera] After the update to Kernel 4.9.88 the ov564x_mipi camera driver failes to probe
0003822: [Kernel] Add support for PicoCoreMX6SX to Linux
0003819: [Kernel] Add support for PicoCoreMX6UL to Linux
0004024: [Kernel] Improve PicoModA9 device-tree settings for LCD supply
0004022: [Kernel] Add new default LVDS display FS-J070WVTC0211 to F&S device-trees
0004021: [Kernel] Add support for atmel mxt224e version 2
0003927: [Kernel] Add official PCIe support for F&S boards
0003929: [Kernel] Improve focaltech ft5x06 driver support reverse coordinates
0003948: [Touch driver] Support reverse coordinates for ft5x06 driver
0003545: [RTC] QBlissA9r2 RTC fix in new revision
0003513: [Kernel] Update kernel to linux-4.9.88
0003820: [eMMC] eMMC detection does not work on PicoCOMA9X
0003801: [Camera] Add support for 4-channel camera via ISL79985/79987 MIPI-CSI chip
0003818: [Kernel] Use new F&S Tux logo in kernel 4.9.x
0003817: [Kernel] Add support for PicoCOMA7 to Linux
0003478: [Kernel] Update kernel to linux-4.9.11
0003805: [HDMI] Add swapped pixel format for QBlissA9/QBlissA9r2 to fix lane swapping bug
0003489: [HDMI] hdmi color mapping not configurable over devicetree
0003490: [HDMI] force dvi mode for hdmi
0003804: [Audio] Playing audio on boards with SGTL5000, sometimes left and right channels are swapped
0003803: [Bluetooth] Add support for Bluetooth to fsimx6sx/ul
0003802: [Ethernet] Adding network bridging to fsimx6sx causes WLAN driver to fail
0003800: [TVOUT driver] Add support for analog video out on ADV7391 video encoder
0003799: [Serial Driver/Interface] Serial driver for i.MX6 has bad performance for short transfers
25 issues View Issues
0003821: [Kernel] Add support for PicoCoreMX7ULP to Linux
1 issue View Issues
0003816: [Touch driver] The touch on ET070080 display has reversed x-coordinates in default configuration
0003798: [Kernel] Add support for i.MX6ULL to F&S kernel
0003797: [Ethernet] Add option to show ethernet link status on any GPIO based LED
0003796: [Audio] If CONFIG_EFUSA9X_AUDIO is not set, device tree compilation for efusA9X fails
4 issues View Issues
0003795: [PCIexpress] Add support for PCIe on fsimx6sx
0003794: [WLAN] Add support for Silex QCA9377 WLAN/Bluetooth to Linux
0003793: [Serial Driver/Interface] UART chip 16550 can not use all four ports
3 issues View Issues
0003689: [General] Add proper support for Cortex-M4 on fsimx6sx
0003688: [Kernel] Add support for CONT1
0003670: [Kernel] Add support for PicoCOMA9X
0003678: [Kernel] Add support for GAR1
0003696: [Display] With several displays, switching off a display at runtime may disable wrong backlight
0003682: [eMMC] Accessing eMMC is unstable and may have timeouts
0003674: [Kernel] Add support for NetDCUA9 to kernel 4.1
0003681: [Audio] Audio playback on SGTL5000 does not start with full volume
0003695: [Serial Driver/Interface] RTS/CTS does not work
0003694: [Kernel] Restructure F&S device trees and make them as similar as possible
0003692: [NAND-FMD] Move dma_apbh descriptors to IRAM to work in suspend mode
0003693: [Kernel] Some F&S boards freeze after some time
0003691: [Ethernet] Ethernet speed can not be limited to 100 MBit/s
0003690: [USB host] Use dedicated USB PWR function instead of GPIO where possible
0003687: [PWM] On fsimx6sx some unused PWM ports are active
0003686: [DIO] Some GPIOs do not work on F&S boards
0003684: [Touch driver] USB pcap touch ET8076 does not work
0003667: [Kernel] Add support for QBlissA9 for kernel 4.1
0003683: [Kernel] Add support for QBlissA9r2
0003672: [Kernel] Add support for Cube2.0
0003680: [Touch driver] Enable ILI21XX and ST1633i touch controllers on F&S boards
0003679: [Display] LCD/LVDS displays flicker on fsimx6sx/ul
0003675: [Kernel] Add support for PicoCOM1.2 to kernel 4.1
0003676: [Display] Display ET070080 shows rotated content on aST-ADP-EDT1
0003673: [Audio] Add support for WM9715 audio/touch codec
0003671: [Kernel] Add gamma correction for leds-pwm.c driver
0003669: [Display] PicoCOMA9x can not correctly drive backlight brightness for display EDT070080
0003668: [Display] Some Qt5 examples do not show proper image
0003666: [Touch driver] Add support for Sitronix ST1633i pcap touch
0002647: [Display] Display on RGB adapter with PCA9632 LED controller (e.g. on efusA9) quickly switches orientation on boot
30 issues View Issues
0002594: [Camera] new clock for Camera on HW Rev 1.20
0002670: [Kernel] Reboot command does not work in Yocto
2 issues View Issues
0003639: [Display] Have similar display configuration on fsimx6sx and fsimx6ul as on fsimx6
0003638: [Display] LVDS is not working on fsimx6sx
0003637: [Ethernet] The second ethernet port on efusA7UL does not work in Linux
0003636: [eMMC] eMMC does not work on efusA9
0003635: [Touch driver] Add support for USB HID multitouch devices
0003634: [Touch driver] Add support for ESMT PCAP touch
6 issues View Issues
0003618: [Audio] On boards with SGTL5000, mono sound is only played back on left channel
0003624: [Kernel] Add proper support for armStoneA9
0003625: [Kernel] Add support for armStoneA9r2
0003633: [Kernel] Add support for PicoMODA9
0003620: [Kernel] Add support for CubeA7UL
0003630: [Touch driver] Clean up code for Focaltech touches
0003623: [Kernel] Clean up fsimx6 device trees
0003629: [Touch driver] Add MXT224 touch support to kernel 4.1.15
0003632: [Display] Simplify display configuration on fsimx6
0003631: [Ethernet] New revisions of Micrel KSZ8081 PHY do not work on efusA7UL
0003628: [Kernel] Drop fsimx6* prefix from F&S device tree names
0003627: [Kernel] Some fsimx6 boards run unstable
0003626: [Kernel] Default memory settings for CMA exceed available memory size of some F&S boards
0003622: [Kernel] Module versions of rootfs can not be loaded in development kernel
0003621: [Kernel] Update kernel to newest Freescale/NXP release based on 4.1.x
0003619: [Audio] Sound streams with one channel and 32 bits/sample are played with double speed
0003617: [Kernel] Improve i.MX6/S/DL/Q/SX/UL configuration
0003616: [SD/MMC] Improve MMC data robustness on suspend and shutdown
0003615: [NAND-FMD] NAND driver prevents state for power saving
0003614: [Audio] Audio (SGTL5000) not working after resume from suspend
20 issues View Issues
First version for i.MX6 SoloX
0003606: [Kernel] Add bdinfo for kernel 3.14.x
0003604: [Display] Backlight brightness on RGB adapter is not accessible as backlight
0003605: [Kernel] Improve efusA9X device tree, small driver improvements
0003613: [Display] GPU support fails on some fsimx6sx boards
0003612: [Ethernet] Allow setting Ethernet clock configuration in device tree
0003611: [Kernel] Add support for efusA9 to kernel 3.14.x
0003610: [Camera] Add support for OV9665 camera
0003609: [Display] LCD display shows swapped colors on efusA9
0003608: [Kernel] Update kernel to rel_imx_3.14.52_1.1.0_ga
0003607: [NAND-FMD] NAND: Handle bitflip count of last page correctly
10 issues View Issues
0002664: [NAND-FMD] DMA chain execution failed causes UBI write failures
0003079: [Touch driver] Add support for internal SX8655 on efus-SKIT on efusA9
0003078: [Touch driver] Add support for Focaltech touches to fsimx6
0002580: [Display] Some command line display settings do not work
0002690: [Audio] Remove unneeded audio drivers from QBlissA9 configuration
0002794: [Display] Change display configuration for all iMX6 boards
0002796: [Display] Improve LCD support for all iMX6 boards
0002655: [Touch driver] Touch reports wrong values on fsimx6
0002665: [USB device] On armStoneA9, allow using USB OTG as USB Host port
0002654: [Touch driver] Add fsvybrid features for MXT224 touch to fsimx6
0001907: [Touch driver] Atmel-MXT Capacitive Touch not working on armStoneA9
11 issues View Issues
First release for i.MX6 UltraLite
0003603: [Kernel] Rename F&S device trees
0003602: [Kernel] Add support for efusA7UL
0003601: [Display] Colors red and blue are swapped on LCD on efusA7UL
0003600: [Touch driver] Add support for SX8655 touch to kernel 3.14.x
0003599: [Display] Backlight brightness on RGB-Adapter does not work
0003598: [Touch driver] Add support for Focaltech FT5x06 touch to kernel 3.14.x
0003597: [Display] Add support for parallel RGB interface
0003596: [Kernel] Rebase to kernel 3.14.38 to have support for i.MX6-UltraLite
0003595: [Kernel] Add kernel configuration for Android on efusA9X
0003594: [Display] Accelerated graphics do not work on efusA9X
0003593: [Kernel] Add F&S version of Tux-Logo to kernel 3.14.28
0003592: [Kernel] Add F&S NAND driver for i.MX6 to kernel 3.14.28
0003591: [Kernel] Add support for efusA9X
13 issues View Issues
0002688: [Kernel] Use a common fsimx6_defconfig file for all F&S boards based on i.MX6
0003077: [Display] On armStoneA9, allow having LCD and LVDS in parallel
0002686: [Display] Use F&S Linux Logo (Tux holding NetDCU logo) on i.MX6 boards
0002689: [Ethernet] Use MAC address from U-Boot directly without command line argument
0002692: [Kernel] Rebase i.MX6 code to rel_imx_3.0.35_4.1.0
0003076: [Audio] Fix AC97 on QBlissA9
0002685: [Display] Add support for WSVGA mode on LVDS and for EDT-ET057090 display (RGB)
0002687: [Kernel] Add bdinfo device to show board information in /sys/bdinfo
0002684: [NAND-FMD] Fix NAND flash initialisation on some flash types
0002572: [NAND-FMD] Add new F&S NAND access for i.MX6 to Linux
0002682: [Audio] Improve sound on SGTL5000
0002589: [Kernel] Add basic DualLite/Solo support for QBlissA9
0002414: [Buildroot] Add secure tty support for efusA9
0002159: [Kernel] Board hangs after Reset on Reset button
0002134: [HDMI] Some HDMI resolutions like 1920x1080p-60 do not work
0002090: [Serial Driver/Interface] armStoneA9: When using ttymxc2 as serial console, ttymxc1 soes not work anymore
0002431: [SD/MMC] Add SD Card patch for non-conforming SD Cards
0002059: [Audio] Noise on right headphone channel (QBlissA9 + SINTF 1.20)
0002425: [PowerManagement] armStoneA9 has sporadic errors, most probably when booting
0001879: [U-Boot] flash boot failure on repeated boot test
0002571: [Kernel] Extend the PicoMODA9 basic support
0002570: [Kernel] Extend the armStoneA9 basic support
0002569: [Kernel] Add basic DualLite/Solo support for armStoneA9
0002557: [SD/MMC] Cannot detect SDCard again after removing it
0002412: [Kernel] Add support efusA9
0002410: [U-Boot] Add support efusA9
0002411: [U-Boot] Add PicoMODA9 support
0002413: [Kernel] Add support PicoMODA9
0002055: [Audio] Wrong Buffering for WM9715L Codec on QBlissA9 and QBliss SINTF
29 issues View Issues
0001865: [Touch driver] Add support for SX8655 touch driver
0001853: [Display] Add backlight driver support for digital RGB adapter
2 issues View Issues
0001848: [Kernel] Correct revision detection
1 issue View Issues
0001462: [Display] Add GPU support.
0001463: [SPI] Add support for external SPI bus
0001829: [Serial Driver/Interface] Enable support for external UARTs 1 and 3 on armStoneA9
0001804: [Audio] Add audio support for armStoneA9 platform
0001815: [SD/MMC] SD-Card IO errors on QBlissA9 (with some cards only)
0001813: [SD/MMC] SD-card not working on armStoneA9
0001728: [HDMI] Add generic option to adjust polarity of hotplug pin (HPD)
0001812: [Kernel] Update to release iMX6-13.04.24 (4.0.0)
0001742: [Display] Add digital RGB interface support
0001664: [Display] Initialization HDMI fb driver sometimes hangs
0001452: [PCIexpress] Exception when while scanning devices behind a PCI bridge.
0001570: [Kernel] Merge latest freescale patches (1.1.1)
0001650: [PowerManagement] Enable bypassing of internal LDO to reduce overall power consumption (cpufreq)
0001547: [SD/MMC] Add support for onboard SD slot
0001568: [General] Add support for on-board EEPROM.
0001566: [Kernel] Use ATAG param to pass hardware specific information into kernel.
0001461: [MFC driver] Add support for VideoProcessingUnt (VPU)
0001561: [PowerManagement] Set VGEN6 dependent of HW config. Set to 2.8V for camera or 3.3V for SMBUS.
0001544: [Ethernet] Assert nRST during init (HW rev. 1.20)
0001545: [RTC] Add RTC support
0001546: [Hardware] Detect board HW revision
0001558: [Kernel] Register ArmStoneA9 machine
0001557: [I2C] Rearrange I2C interfaces for HW Rev 1.3
23 issues View Issues
0001460: [Camera] Add camera support (OV9665 via On-Board BT.656).
0001444: [NI2C] Add support for i2c1 (camera SMBUS)
0001455: [WLAN] Add support for On-Board WLAN.
0001456: [Bluetooth] Add support for On-Board Blueooth.
0001509: [NAND-FMD] Increase kernel partition size
0001475: [Touch driver] Add capacitive touch driver for FS-touch adapter (mxt224 based)
0001472: [Kernel] Add custom F&S TUX boot logo
0001468: [Audio] AC97 initialization causes hang on bootup
0001487: [Display] Multiple display usage no longer working in 3.0.35 kernel version
0001471: [Display] Chimei G070Y2 display not working yet (LVDS)
0001442: [Kernel] Merge latest changes from FSL kernel version 3.0.35
11 issues View Issues
0001443: [USB host] Add USB-Host support (4-ports).
0001445: [NI2C] Add support for i2c2 (HDMI DDC port)
0001446: [NI2C] Add support for i2c3
0001447: [CAN] Add support for On-Chip CAN
0001448: [Display] Add support for LVDS port 0 (single LVDS)
0001449: [Display] Add HDMI support
0001450: [SD/MMC] Add support SD-port
0001451: [PCIexpress] Add PCIexpress support
0001453: [Ethernet] Add support for GBit-Ethernet interface.
0001454: [SATA] Add support for SATA interface..
0001457: [Audio] Add audio support for AC97 codec wm9715 - available on QBliss SKIT
0001458: [Audio] Add HDMI-Audio support
0001459: [PowerManagement] Add support for On-Board PowerManagement chip (pfuze100)
0001441: [Kernel] First preliminary release for QBlissA9
14 issues View Issues
Released 2012-11-22
0001237: [CAN] NetDCU14: Add support for CAN with MCP2525 controller (can1)
0001231: [Ethernet] NetDCU14: Add support for Ethernet with AX88796 controller (eth1)
0001274: [CAN] Accessing CAN locks up the system
0001186: [SPI] Fix max_speed_hz computation for S3C64XX SPI
0001185: [SPI] Block I2C0 if SPI0 is running and vice versa
0001183: [Display] Allow setting color depth (bits per pixel) in generic LCD configuration
0001164: [U-Boot] On armStoneA8 with 512MB of RAM, Linux uses only 256MB
0001159: [RTC] RTC does not run, it always shows the same time
0001109: [SPI] User SPI reports error and no device is available
0001409: [Touch driver] Touch driver is very inaccurate and reports quite many wrong values
0001252: [Ethernet] WLAN via USB does not work for big messages
0001261: [Serial Driver/Interface] Allow different serial debug ports depending on board type
12 issues View Issues
0001250: [DIO] NetDCU14: Added support for GPIO (SYSFS), to configure/use gpios from userspace
0001249: [Touch driver] NetDCU14: Added support for dedicated resistive 4-wire touch
0001248: [WDT] NetDCU14: Added support for Watchdog Timer
0001247: [PWM] NetDCU14: Added support for PWM (VEEK), to control with SYSFS
0001241: [RTC] NetDCU14: Added support for RTC (Real Time Clock)
0001240: [SD/MMC] NetDCU14: Added support for MMC
0001239: [NAND-FMD] NetDCU14: Added support for NAND Flash
0001238: [SPI] NetDCU14: Added support for SPI, spi-0 (user), spi-1 (CAN)
0001236: [CAN] NetDCU14: Added support for CAN with MCP2525 controller (can0)
0001235: [Audio] NetDCU14: Added support for Audio with SGTL5000 controller
0001234: [USB host] NetDCU14: Added support for USB Host EHCI/OHCI
0001233: [Display] NetDCU14: Added support for HDMI (VGA)
0001232: [Display] NetDCU14: Added support for LCD (D-RGB)
0001230: [Ethernet] NetDCU14: Added ethernet support with AX88796 controller (eth0)
14 issues View Issues
0001204: [WDT] PicoMOD7A: Added support for Watchdog Timer
0001203: [RTC] PicoMOD7A: Added support for RTC (Real Time Clock)
0001202: [PWM] PicoMOD7A: Added support for PWM, to control with SYSFS
0001201: [DIO] PicoMOD7A: Added support for GPIO (SYSFS), to configure/use gpios from userspace
0001200: [Audio] PicoMOD7A: Added support for Audio with SGTL5000 controller
0001199: [SPI] PicoMOD7A: Added support for SPI, spi-0 (user), spi-1 (CAN)
0001198: [I2C] PicoMOD7A: Added support for I2C, i2c-0 (audio controller), i2c-1 (user) not tested, i2c-2 (user)
0001197: [NAND-FMD] PicoMOD7A: Added support for NAND Flash
0001196: [Display] PicoMOD7A: Added support for LCD (LVDS)
0001195: [Touch driver] PicoMOD7A: Added support for dedicated resistive 4-wire touch
0001194: [Serial Driver/Interface] PicoMOD7A: Added support for UART2 (debug/console), UART1 (user), UART0 (CTS/RTS) not tested.
0001192: [USB host] PicoMOD7A: Added USB Host support EHCI/OHCI
0001193: [SD/MMC] PicoMOD7A: Added MMC support for CH-0 and CH-2 (uMMC)
0001191: [CAN] PicoMOD7A: Added CAN support with MCP2515 controller
14 issues View Issues
0001019: [USB host] USB mice don't work, however USB storage media do work
1 issue View Issues
0005166: [General] Add secure boot support for target fsimx8mm
1 issue View Issues
0004187: [General] Rework whole User Tool scripts
0003828: [General] Support current Code Signing Tool
0004100: [General] Add support for sign/encrypt zImages
0004101: [General] Improve load addresses of FDT/Kernel
4 issues View Issues
0003567: [General] Improve naming of encrypted images
0003566: [General] Remove nboot_for_key
0003565: [General] Support i.MX6ULL CPUs
0003564: [General] Support new i.MX6 CPU revisions
0003563: [General] Remove support for ZMK encryption
0003562: [General] Improve error message syntax
6 issues View Issues
0005117: [Ethernet] eth1 does not work on armStoneA5.2
1 issue View Issues
0002544: [Touch driver] Review Focaltech touch drivers
1 issue View Issues
0002668: [SPI] Bad SPI timing on PicoCOMA5
0002442: [General] Add support for HGATEWAY in Linux
0002380: [Touch driver] File ft_app.i missing in Focaltech touch driver V2
0002179: [Touch driver] Atmel MXT touch does not work on Vybrid
0002513: [Display] Fix layer mapping and alpha blending on Vybrid DCU
0002459: [NAND-FMD] NAND driver reports "timeout waiting for Ready" when network traffic is high
0002382: [RTC] CUBEA5: System clock drifts for about 36s per hour
0002433: [Ethernet] After ethernet cable disconnects, driver sometimes hangs with error "eth0: tx queue full!."
8 issues View Issues
0002333: [Touch driver] Add optional second touch driver for Focaltech touch controllers
0002334: [Matrix keyboard] Add cycle based scan algorithm for matrix keypad
0002314: [NAND-FMD] Handle blank pages with bitflips in Linux on fsvybrid
0002317: [RTC] RTC shows wrong date/time when power is removed
0002064: [USB host] Add support for second USB host
0002299: [Matrix keyboard] Matrix keyboard not working
0002325: [Serial Driver/Interface] On PicoCOMA5, if UART B is disabled and UART C is used instead, two defines are missing
7 issues View Issues
New NAND flash driver, block refresh, new boot strategies, Ethernet improvements
0002276: [General] Accept NBoot-Args passed from U-Boot
0002293: [USB device] Use file-storage as USB gadget by default
0002277: [General] Show more platform specific data in sys/bdinfo
0002183: [NAND-FMD] Support 16-bit Hardware-ECC on Vybrid in Linux
0002175: [Ethernet] Add support for correct Ethernet PHYs on fsvybrid
0002181: [Ethernet] Add support for Micrel PHY 8081RNA on armStoneA5, NetDCUA5, AGATEWAY
0002048: [NAND-FMD] Switch to hardware ECC computation in NAND
0002192: [General] Add power switching for GSM modem on AGATEWAY
0002194: [General] Add support for login_tty to sys/bdinfo
0002191: [Serial Driver/Interface] Add support for switching the PAD routing to UART driver on Vybrid
0002171: [NAND-FMD] Do not use flash based Bad Block Table (BBT)
0002178: [Kernel] Add support for Afriso Gateway in Linux
0002176: [Ethernet] Add interrupt support for Ethernet PHYs on armStoneA5 and NetDCUA5
0002174: [Ethernet] FEC0 and FEC1 ethernet ports can not be used separately
0002172: [SD/MMC] Add support for ESDHC0 on Vybrid in Linux
0002173: [PWM] Support PWM driven LEDs with inverted logic (active low)
0002177: [Kernel] The status LEDs on fsvyvbrid are not kept from U-Boot
17 issues View Issues
0002004: [Matrix keyboard] Add support for matrix keyboard
0002042: [Kernel] Add support for on-board LEDs
0002089: [Ethernet] Add device to show OTP settings like MAC address in sysfs
0002098: [Kernel] Sleep functions on Vybrid only work with mulitples of 10ms
0002168: [Kernel] Apply new Timesys modifications to Vybrid platform
0002169: [DIO] Fix filter settings for digital inputs
0002170: [I2C] Improve software I2C handling if line is stuck
0002095: [Display] Improve display clock rate setting for Vybrid DCU
0002061: [I2C] I2C pins are actively driven instead of open drain
0002088: [Touch driver] EDT capacitive touch (FT5x06) does not work on Vybrid platforms
0002047: [Touch driver] Reset SX8655 touch controller before using it
11 issues View Issues
0002001: [Display] Add power switching for LCD (e.g. when screen saver/blanking is active)
0002003: [General] Support pin configuration in menuconfig
0002002: [General] Add support for PicoCOMA5 Board Rev. 1.10/1.2x
0002000: [I2C] Support for I2C1/2/3 is missing
0001994: [Kernel] Add support for Level interrupts on Vybrid GPIOs
0001999: [Kernel] Add support for Default button on CUBEA5
0001998: [General] Add support for CUBEA5
0001997: [Serial Driver/Interface] Early debug output on serial port fails
0001980: [Kernel] Add support for NetDCUA5
0001979: [Touch driver] Pressing a button with SX8655 touch does not always work
0001995: [Kernel] The filter on GPIO inputs is configured wrongly
0001993: [Kernel] Apply new Timesys modifications to Vybrid platform
0001996: [SD/MMC] SD/MMC does not work correctly on Vybrid
0001992: [WLAN] Add support for wl12xx WLAN chip
0001765: [Serial Driver/Interface] Enable UART3
15 issues View Issues
0001755: [Display] Remove debug output 'update_lcdc: dcu_div is 3'
0001990: [Display] Add 320x240 display for PicoCOMA5
0001991: [Touch driver] On-board SX8655 touch does not work
0001987: [Kernel] Use common fsvybrid_defconfig for all F&S Vybrid boards
0001986: [Display] Use 16bpp for framebuffers by default
0001985: [Serial Driver/Interface] Use correct UART in zImage uncompressor
0001984: [Serial Driver/Interface] Add support for UART4 and 5 to allow UART5 as debug port on PicoCOMA5
0001983: [Kernel] Show L2 cache configuration
0001982: [Kernel] Add and use F&S Tux logo (Tux holding NetDCU logo)
0001981: [Kernel] Add Multi Core Communication Library (MCC) to Linux kernel
0001989: [Touch driver] Add MXT touch to Vybrid platform
0001988: [Touch driver] Add touch driver for Focaltech FT5x06 to Vybrid platform
0001867: [Touch driver] On-board touch controller not working on armStoneA5
13 issues View Issues
First preliminary release of Vybrid platform
0001723: [General] Order MACH_TYPE numbers for armStoneA5 and PicoCOMA5
0001752: [Display] Add PCA9632 LED controller driver
2 issues View Issues
0006069: [NBoot] Rename DRAM config files
0006068: [NBoot] Add support for PCoreMX8MM FERT16 and FERT18 and PCoreMX8MMr2-FERT18
0006066: [NBoot] [PCoreMX8MMr2] VDD_DRAM_PU is not set correctly
3 issues View Issues
0002037: [Serial Driver/Interface] Baud rate of debug port can not be changed
0002036: [SD/MMC] SD Card is always write-protected
0002035: [Touch driver] mach-picocom4.c won't compile if s3c2410_touch is disabled
0002034: [Touch driver] Buttons sometimes need to be touched twice on Focaltech FT5x06 to be recognized
4 issues View Issues
Released 2013-08-21
0002032: [Display] Add generic LCD configuration
0002031: [Kernel] Add and use F&S Tux logo (Tux holding NetDCU logo)
0002033: [Touch driver] Buttons are only recognized after a second touch
0002030: [Serial Driver/Interface] Add correct Pull-ups and Pull-downs to UART lines
0001767: [SD/MMC] Some SD cards report timeouts
0001707: [SPI] Sending more than 22 bytes data not working w/ speed < 1MHz
0001766: [Touch driver] Use improved driver from S5PV210
0001611: [Display] Add PWM backlight control for VEEK
0001610: [Audio] Noisy sound when recording
0001609: [Touch driver] FT5X06: Add SYSFS support to configure parameters
10 issues View Issues
Released 2012-06-29
0001101: [CAN] GPIO auf SPI & CAN
1 issue View Issues
0006514: [U-Boot] [FSIMX8M*] Include imx_tmu driver for fsimx8m(m/n/p)
0006515: [U-Boot] [FSIMX8MM] Fix USB handling for fsimx8mm
0006516: [U-Boot] [FSIMX8M*] Adjust size of CMA only for DRAM > 1GB
0006513: [U-Boot] Add support for OSM8MM
4 issues View Issues
0006466: [U-Boot] Improve boottime for fastboot
0006465: [U-Boot] Support output of checksum in fsimage
0006464: [U-Boot] Add support for armStoneMX8MP Rev 110
3 issues View Issues
Pre-Release für PicoCoreMX93 und OSM93 abgeschlossen
0006399: [U-Boot] Improve RAM timings for PicoCoreMX93
0006415: [U-Boot] Improve bootloader env. handling for fsimx93
0006414: [U-Boot] SPI_B: Improve picocoremx93.dtsi
0006413: [U-Boot] In imx8m/soc.c, rename board_fix_fdt() to arch_fix_fdt()
0006412: [U-Boot] Improve build process for fsimx93
0006411: [U-Boot] Split fsimx93_deconfig in two configurations
0006410: [U-Boot] Improve picocoremx93 device tree
0006409: [U-Boot] Improve fsimx93 board configuartion
0006408: [U-Boot] Improve functionality for fsimx93
0006407: [U-Boot] Remove unused function for android
0006406: [U-Boot] Add F+S common configuartion
0006405: [U-Boot] Add fs common functionality for fsimx93
0006404: [U-Boot] Enable fs_eth_common function for iMX9 architecture
0006403: [U-Boot] Improve fs_fdt_common functionality
0006402: [U-Boot] iMX9: Rename board_fix_fdt() to arch_fix_fdt()
0006401: [U-Boot] Initialize lpuart[3-8] root clocks
0006400: [U-Boot] Add a per clock for lpuart3 to lpuart8
0006398: [U-Boot] Improve fs-osm-sf-mx93-adp-osm-bb-u-boot.dtsi
0006397: [U-Boot] Adjust lpddr4 timings for osm
0006396: [U-Boot] Update fsimx93 to 2024.04
0006395: [U-Boot] Update defconfig to 2024.04
0006394: [U-Boot] Add nxp version of u-boot-2024.04
0006319: [U-Boot] fsimx93: Handling of thermal zones for different cpu types is not supported
23 issues View Issues
0006462: [U-Boot] [EFUSMX8MP] Fix USB device in Device-Tree
0006461: [U-Boot] [FSIMX8M*] Support files up to 64MB for bootm
0006460: [U-Boot] Add fs_selftest support
0006459: [U-Boot] Add board-cfg entries to bdinfo in Linux kernel
0006458: [U-Boot] [PCoreMX8MP/r2] Fix first access for sd cards
0006457: [U-Boot] [FSIMX8MP] For saveenv check if the current HW partition on eMMC changed
0006456: [U-Boot] [ADP-NDCU2PCORE] Add hotfix configuration for SD_A
0006455: [U-Boot] [FSIMX8MP] Move VLCD_ON and BL_ON to UBoot Device-Tree
0006454: [U-Boot] [FSIMX8MP] Fix handling of slow USB devices for xhci
0006357: [U-Boot] Configure defaut RDC Configuration for the M7 on fsimx8mp
0006453: [U-Boot] [FSIMX8MP] Move USB handling to UBoot Device-Trees
0006452: [U-Boot] [fsimx8mp] Support boards with DRAM greater than 3GB
0006356: [U-Boot] Add loading of secondary Images to fsimx8mp
13 issues View Issues
0006233: [U-Boot] Update fsimx6 boards to U-Boot 2021.04
1 issue View Issues
0006194: [U-Boot] Uboot for fsimx6ul-Y2024.03
1 issue View Issues
0006191: [U-Boot] Update Secure Boot to new release
0006192: [U-Boot] Update fsimx8mn to U-Boot 2021.04
0006190: [U-Boot] Add support for loading secondary SPL and Uboot
3 issues View Issues
0006116: [U-Boot] Remove SHA256 support for fsimx6sx
0006112: [U-Boot] Update fsimx6sx boards to U-Boot 2021.04
2 issues View Issues
0006030: [U-Boot] Remove SHA256 support for fsimx6ul
0006031: [U-Boot] Update fsimx6ul boards to U-Boot 2021.04
2 issues View Issues
0006005: [U-Boot] Addfsheader.sh: Check for crc32 and xxd before using them
0006004: [U-Boot] Fix default entry for environment in NAND
2 issues View Issues
0005986: [U-Boot] Update fsimx8mm architecture to Uboot 2021.04
0005985: [U-Boot] On fsimx8mm, add old device tree names for compatibility
0005984: [U-Boot] Add command fsimage boot to show current boot settings
0005982: [U-Boot] Drop board revision from BOARD-CFG names
0005940: [U-Boot] F&S Update for files bigger that 2GB fails
5 issues View Issues
0005939: [U-Boot] Uboot is now located in the boot partition of eMMC
0005937: [U-Boot] Relocate U-Boot and Environment in fsimage save if needed
0005938: [U-Boot] Have new NAND/MMC layouts for fsimx8mm/mn/mp
0005936: [U-Boot] Nboot can now be written to NAND flash with U-Boot
0005935: [U-Boot] Introduce crc32 checksums for fsimage save command
0005934: [U-Boot] Fix bootaux command
0005933: [U-Boot] Improve Uboot versioning
0005932: [U-Boot] Update to NXP u-boot-2021.04
8 issues View Issues
0005789: [U-Boot] Remove certain u-boot commands for secure boot
0005780: [U-Boot] Add functionality for Secure Boot on i.MX8MM Boards
0005781: [U-Boot] Add Option to menuconfig to toggle secure boot messages
0005782: [U-Boot] Improve functions from arch/arm/mach-imx/checkboot.c
0005783: [U-Boot] Add support for signed U-Boot Images for i.MX8M Boards
0005784: [U-Boot] Support signed Linux images on i.MX8M based Boards
0005785: [U-Boot] Add i.MX8MN support for Secure Boot
0005786: [U-Boot] Add support for op-tee
0005787: [U-Boot] Fix OC-RAM Layout for fsimx8mp
0005788: [U-Boot] Add secure boot for fsimx8mp
10 issues View Issues
Ist für armStoneMX8M vorbehalten.
0006065: [U-Boot] [PCoreMX8MMr2] Ethernet led is not configured correctly
0006064: [U-Boot] [REALTEK PHY] ALDPS mode is not enabled and EEE LED indication is not disabled
0006063: [U-Boot] [FSIMX8MM] Ethernet is still enabled after booting into linux
3 issues View Issues
0005667: [U-Boot] fsimx8mp: Improve fs_spl_memtest configuration in spl.c
0005666: [U-Boot] fsimx8mp: Correct some comments
0005663: [U-Boot] Increase nboot version to 2022.12
0005665: [U-Boot] Correct mmc env offset values in picocoremx8mp.dtsi
0005664: [U-Boot] fsimx8mp: Improve ram timings for picocoremx8mp(r2) 2GB versions
0005662: [U-Boot] Add history file for fsimx8mp to describe fw for nboot
0005661: [U-Boot] Improve dram timings for armStoneMX8MP-V4I
0005660: [U-Boot] ddr:imx8m: Add DRAM PLL to generate 900MHz output
8 issues View Issues
Released by Anatol Derksen
0005142: [U-Boot] Update process does not fail if single command fails
0005626: [U-Boot] Improve phy shutdown for dwc_eth_qos driver
0005625: [U-Boot] Improve primary eth interface for fsimx8mp
0005624: [U-Boot] Add new environments for bootloader fs update in fsimx8mp.h
0005623: [U-Boot] Improve ethernet aliases for fsimx8mp
0005622: [U-Boot] Improve features support for fsimx8mp
0005621: [U-Boot] Add nboot configuration for PicoCoreMX8MPr2-Fert1-5
0005620: [U-Boot] Add support for picocoremx8mpr2
0005619: [U-Boot] Rework device tree for picocoremx8mp
0005618: [U-Boot] Add feature option for eth-phy-a and eth-phy-b
0005617: [U-Boot] Add nboot config for armStoneMX8MP-Fert0.100
0005616: [U-Boot] Improve USB2 support for fsimx8mp
0005615: [U-Boot] Improve nboot configuration for armStoneMX8MP-Fert4.100
0005614: [U-Boot] Add config for armStoneMX8MP-FERT5.100
0005613: [U-Boot] Fix FDT_TEMP entries for fsimx8mm/mp
0005612: [U-Boot] Add no-uboot-override to fs_fdt_set_val()
0005611: [U-Boot] Enable FS mmc common functions for fsimx8mp
0005610: [U-Boot] Fix mmc_get_env_dev(), simplify board_mmc_get_env_dev()
0005609: [U-Boot] Enable CONFIG_FASTBOOT_UUU_SUPPORT on fsimx8mm/mn/mp
0005608: [U-Boot] Revert F&S changes in iomux.c and console.c
0005607: [U-Boot] Remove usb host initialization in SPL for fsimx8mp
0005606: [U-Boot] Improve device detection on typec connector for fsimx8mp
0005605: [U-Boot] Update NBoot version for fsimx8mm/fsimx8mm/fsimx8mp to 2022.09
0005627: [U-Boot] [fsimx8mp] Disable not used ethernet nodes in device tree
0005604: [U-Boot] Fix env device for fsimx8mp
0005603: [U-Boot] Fix new RAM timings for fsimx8mm
26 issues View Issues
0005573: [U-Boot] Merge tag 'fsimx8mm-Y2021.04.2' into HEAD
1 issue View Issues
0005556: [General] Disable ethernet before booting linux for fsimx8mm
0005555: [General] Disable phy CLKOUT for PicoCoremx8MMr2
0005554: [General] Improve picocoremx8mmr2 device tree
0005553: [General] Enable ALDPS mode and disable EEE LED indication
0005552: [General] Move LED configuration of Realtek PHY to board_phy_config
0005551: [General] Change ingress delay for KSZ9893R Ethernet switch on fsimx8mm/mn
6 issues View Issues
0003558: [U-Boot] Add support for PicoCoreMX7ULP
0005384: [U-Boot] Fix fsimx7ulp reloction error
0005383: [U-Boot] Add GIGADEVICE gd25lq80c spi nand flash support
0005382: [U-Boot] Add picocoremx7ulp spi flash device support
0005381: [U-Boot] Increase fsimx7ulp default CMA size
0005380: [U-Boot] Improve imx7ulp reset cause handling
0005379: [U-Boot] Improve imx7ulp bootaux command
7 issues View Issues
0005320: [U-Boot] Improve cma setup for target fsimx7ulp
0005323: [U-Boot] Add "is_usb_boot" function for platform fsimx6sx/ul
0005322: [U-Boot] Improve is_usb_boot function for MX6 CPUs
0005321: [U-Boot] Add GPU detection for fsimx6sx
0005319: [U-Boot] Improve rndis gadget configuration on platform fsimx7ulp
0005318: [U-Boot] Add support for target fsimx7ulp
0005316: [U-Boot] lib: errno: avoid error format-overflow
0005315: [U-Boot] Backport new usb gadget driver from version v2019.01
0005178: [U-Boot] U-Boot target fsimx6 doesn´t build any more due to size of U-Boot exceeds
0005176: [U-Boot] Add new nboot config TBS2-FERT3
0005175: [U-Boot] Fix fastboot for i.MX8
0005174: [U-Boot] Set and use ecc.total/ecc.bytes correctly in mxs-nand-fus.c
0005173: [U-Boot] Fix bootcmd-fastboot override when booting from USB
0005158: [U-Boot] Update process overwrites UBoot in eMMC when USB read fails
0005157: [U-Boot] Merge own fsimx7ulp U-Boot git to F&S default git
0005156: [U-Boot] Add dynamic setup of linux device-tree within U-Boot
0005155: [U-Boot] Add support for PicoCoreMX6UL100
0005132: [U-Boot] Boards cannot boot when started with MFG tool
0005134: [U-Boot] The gpmi-nand-fus driver computes the eec byte sitze wrong
19 issues View Issues
0005326: [U-Boot] Change DACR to client access control to fix cache errors
0005325: [U-Boot] Add support for command fsimage
0005324: [U-Boot] Add support for picocoremx6ul100
3 issues View Issues
0005177: [U-Boot] Add support for board efusA9r2
1 issue View Issues
0005172: [U-Boot] Fix commands to create F&S Updater volumes in fsimx8mn
0005054: [U-Boot] Correct boot from ubi environments to create F&S Updater volumes
0005041: [U-Boot] Add env import/export cmd
3 issues View Issues
0005115: [U-Boot] Fix DTS adaption to support backwards compatibilit
1 issue View Issues
0005053: [U-Boot] Fix pmoda9 LCD pads
0005052: [U-Boot] net: nfs: remove superfluous packed attribute
0005051: [U-Boot] net: nfs: remove superfluous conversions
0005050: [U-Boot] net: unaligned copying of unsigned long
0005049: [U-Boot] kconfig: Avoid format overflow warning from GCC 8.1
0005047: [U-Boot] Fix fsimx6 absolut pathes for Linux device tree adaption
0005046: [U-Boot] Fix imx6 display
0005045: [U-Boot] Fix fsimx6 usb power polarity
0004955: [U-Boot] [fsimx8mx]U-boot corruption when fixed-phy is used
9 issues View Issues
0004946: [U-Boot] Add variant of PCoreMX8MN
0004945: [U-Boot] Add USB Type C OTG functionality
0004944: [U-Boot] Adjust NAND areas for fsimx8mn nboot
0004943: [U-Boot] Fix building process for fsimx8mm
0004942: [U-Boot] Remove unused folder fsimx8mx_nano
0004941: [U-Boot] In fat_fus.c, handle files > 2GB better
0004940: [U-Boot] On fsimx8mn, disable code to detect if running on secondary SPL
0004939: [U-Boot] Handle new eMMC layout on fsimx8mn
0004938: [U-Boot] Increase size for fs_sys_prompt[]
0004937: [U-Boot] Add correct fuse values for fsimx8mn
0004936: [U-Boot] Allow optional board-fdt in BOARD-CFG files
0004935: [U-Boot] Change ingress delay for KSZ9893R Ethernet switch on fsimx8mm/mn
0004934: [U-Boot] Add -ddr3l/-lpddr4 to device tree names for fsimx8mm/fsimx8mn
0004933: [U-Boot] Change fsimx8mn to use NBoot
0004932: [U-Boot] Move enum fsimg_mode from fs_image_common.h to fs_image_common.c
0004929: [U-Boot] Increase NBoot version to 2021.07
16 issues View Issues
0005262: [Kernel] Improve iomuxc support and emmc support for fsimx6ul
0005261: [U-Boot] Improve PicoCOMA7 lcd and usb setup
0005260: [U-Boot] Add support for command fsimage
0005259: [U-Boot] Improve emmc layout for target fsimx6ul
0005258: [U-Boot] Add support for same defconfig independent from boot device fsimx6ul
0005257: [U-Boot] Add support for picocoremx6ul100 on platform fsimx6ul
6 issues View Issues
0004926: [U-Boot] Add config for PCoreMX8MM-FERT13.130
0004925: [U-Boot] Add dynamic setting of cpu temp ranges for fsimx8mm
0004924: [U-Boot] Add part command to uboot console
0004923: [U-Boot] Merge architecture tbs2 into fsimx8mm
0004922: [U-Boot] Improve support for architecture tbs2
0004921: [U-Boot] Set tbs2.c UPDATE_DEF to mmc0,mmc2
0004920: [U-Boot] Improve fsimx8mm mac address setup
0004384: [General] [ARMv7][NOT RELEASED] Uboot crashes when using tftp command multiple times
8 issues View Issues
0004855: [U-Boot] Improve FDT support and naming for fsimx8mx-nano
0004856: [U-Boot] Improve fsimx8mm target
0004857: [U-Boot] Improve fec_mxc fixed link support for DM
0004858: [U-Boot] Remove target fsimx8mx
0004861: [U-Boot] Improve feature support for fsimx8mm
0004860: [U-Boot] Fix compilation warnings for fsimx8mm
0004859: [U-Boot] Remove arch/arm/mach-imx/mx8mx
0004919: [U-Boot] Change NBoot version to current one
0004918: [U-Boot] Remove setting ethaddr for WLAN on fsimx8mm
0004917: [U-Boot] Improve fsimx8mm linux fdt fixups
0004916: [U-Boot] Improve fsimx8mm KSZ9893 Switch setup
0004915: [U-Boot] Improve fs_board_common environment variable setup
0004914: [U-Boot] Fix-up for devicetrees fsimx8mm
0004913: [U-Boot] Add support for resetting phy via device tree entry
0004912: [U-Boot] Fix CONFIG_ENV_SIZE to 16KB
0004911: [U-Boot] Fix DSI_PHY_REF clock settings
0004910: [U-Boot] Fix have-eth-switch config entry to have-eth-phy
0004909: [U-Boot] Set boardinfo.name to PicoCoreMX8MX for boards with 8mx config
0004908: [U-Boot] Fix addfsheade.sh for yocto build
0004907: [U-Boot] fsimx8mm: Fix handling for PicoCoreMX8MX
0004906: [U-Boot] fsimx8mm: Add all current BOARD-CFGs
0004905: [U-Boot] Add CONFIG_SPL/TPL_AUTOBUILD, do not build SPL by default on fsimx8mm
0004904: [U-Boot] fsimx8mm: Handle device tree fixup more cleanly
0004903: [U-Boot] fsimx8mm: Drop debug output, rename MTD partition Spl to NBoot
0004902: [U-Boot] Fix nand_spl_load_image() in case of bad blocks
0004901: [U-Boot] Also write U-BOOT files in command fsimage save
0004900: [U-Boot] Also use indendation in scripts/fsimage.sh
0004899: [U-Boot] fsimx8mm: Add MMC loading/saving, refactor fsimage code
0004898: [U-Boot] fsimx8mm: Have separate nboot-info for NAND and MMC
0004897: [U-Boot] fsimx8mm: When loading U-Boot, provide offset values from nboot-info
0004896: [U-Boot] Allow NAND environment offsets in device tree
0004895: [U-Boot] fsimx8mm: On eMMC, load environment from boot partition
0004894: [U-Boot] Handle kernel, fdt and rootfs according to boot device
0004893: [U-Boot] fsimx8mm: Add fuse subcommand for fsimage
0004892: [U-Boot] fsimx8mm: Get rid of fs_nboot_args and use cfg_info instead
0004891: [U-Boot] Add fsimage command to handle NBoot images
0004890: [U-Boot] Allow using function fdt_print() from outside of cmd/fdt.c
0004889: [U-Boot] fdt_support.c: Fix bug in fdt_getprop_u32_default_node()
0004888: [U-Boot] fsimx8mm: Identify boot system with NXP boot devices
0004887: [U-Boot] fsimx8mm: Add nboot-info for BOARD-CFGs, use .*.tmp files in Makefile
0004886: [U-Boot] Move fs_image.[ch] from fsimx8mm to common
0004885: [U-Boot] Have environment in NAND or MMC on fsimx8mm
0004884: [U-Boot] Use new MTD partition layout on fsimx8mm, clean up boot srategies
0004883: [U-Boot] fs_image.c: Have two copies of BOARD-CFG and FIRMWARE
0004882: [U-Boot] mxs_nand_spl: Do not stop when ONFI version is unknown
0004881: [U-Boot] mxs_nand: Reduce malloc usage in SPL
0004880: [U-Boot] cli_hush: Add support for indirect parameter expansion
0004879: [U-Boot] Add fs_board_get_boot_device_from_fuses() to fs_board_common.c
0004878: [U-Boot] Add nboot build process for fsimx8mm
0004877: [U-Boot] Change SPL on fsimx8mm to use F&S NBoot images to boot
0004876: [U-Boot] Add fs_image library to load and handle F&S images on fsimx8mm
0004875: [U-Boot] Add streaming option to SDP protocol
0004874: [U-Boot] Fix Kconfig prompt for MXC GPIO driver
0004873: [U-Boot] Add fsimage script
0004872: [U-Boot] New version of addfsheader as a script, remove old C version
0004871: [U-Boot] Add Kconfig options to create a disassembler listing
0004870: [U-Boot] Also use memalign_simple() in SPL, not only malloc_simple()
0004867: [U-Boot] Append for commit "Add support for I2C_GPIO to configure switch on fsimx8mm"
0004866: [U-Boot] Add support for I2C_GPIO to configure switch on fsimx8mm
0004865: [U-Boot] Improve fsimx8mm mac address setup
0004864: [U-Boot] Improve fsimx8mm SPL settings
61 issues View Issues
0004505: [U-Boot] Improve support for target fsim8mm
0004845: [U-Boot] Improve bd71837 pmic driver
0004844: [U-Boot] Improve fsimx8mx support
0004843: [U-Boot] Improve uart4 support for tbs2
0004842: [U-Boot] Add FS Update Support for fsimx8mm
0004841: [U-Boot] Disable display support for fsimx8mx_nano
0004840: [U-Boot] Add fsimx8mx_nano support
0004839: [U-Boot] Improve fsimx8mx defconfigs
0004838: [U-Boot] Improve linux,cma size settings for fsimx8mx
0004837: [U-Boot] Disable display support for fsimx8mx
0004836: [U-Boot] Fix build warnigs for n535521 mipi driver
0004835: [U-Boot] Improve MIPI-DSI PMS restriction values
0004834: [U-Boot] Improve support for static board config
0004833: [U-Boot] Fix fsimx8mx nand defconfig
0004832: [U-Boot] Use legacy ethernet driver for fsimx8mx
0004831: [U-Boot] Improve DRAM size detection for fsimx8mx
0004830: [U-Boot] Improve DRAM size configuration for fsimx8mx
0004847: [U-Boot] Improve fixed config for fsimx8mx
0004846: [U-Boot] Add possibility to set cma size via DTS for fsimx8mx
0004829: [U-Boot] Fix fsimx8mx RAM timings
0004828: [U-Boot] Add support for target TBS2
0004507: [U-Boot] Wrong character in debug messages
0004506: [U-Boot] Add support to read phy address from device-tree for fec_mxc
0004504: [U-Boot] Improve USB and Display support for PicoCOMA7
0004502: [U-Boot] Improve IOMUX_PAD macros
0004501: [U-Boot] Improve serial devices and netconsole implementation
0004498: [U-Boot] Board hangs for devices which have MMC as bootdevice
27 issues View Issues
0004323: [Display] Add support for target fsimx8mm
0004503: [U-Boot] Add basic device tree support for serial drivers on F&S platforms
2 issues View Issues
0004379: [General] [i.MX6UL] Create PicoCOMA7 release
1 issue View Issues
0004397: [General] Create PicoCoreMX6UL release to support eMMC as boot device
1 issue View Issues
0004397: [General] Create PicoCoreMX6UL release to support eMMC as boot device
1 issue View Issues
0004379: [General] [i.MX6UL] Create PicoCOMA7 release
1 issue View Issues
0004497: [U-Boot] Improve DDR init support
0004499: [U-Boot] Improve max frequency for SDHC High Speed Mode
0004500: [U-Boot] Add support for target fsimx8mn
3 issues View Issues
0003220: [U-Boot] Secure Boot Issue, saving/starting Images
1 issue View Issues
0003546: [U-Boot] Secure Boot HAB header check function failure
0003482: [U-Boot] secure boot improve authentication procedure
0003481: [U-Boot] Improve secureboot HAB address verification
0003480: [U-Boot] Update UBoot secure boot branch to current release fsimx6ul-V2.1
4 issues View Issues
0004496: [U-Boot] Add support for target fsimx8mm
1 issue View Issues
0003953: [U-Boot] UBoot set OTG PWR polarity to active high but it´s active low
0003954: [U-Boot] Add support for PicoCoreMX7ULP revision 1.20
2 issues View Issues
0004162: [U-Boot] Fix display support for fsimx6sx
0004161: [U-Boot] SPI initialization doesn´t work anymore
2 issues View Issues
0004160: [U-Boot] Fix display support for PicoCoreMX6UL
0004025: [U-Boot] Add support for gar1 revision 1.40
2 issues View Issues
0003479: [U-Boot] Improve auxiliary core support (Cortex-M4) in UBoot
0003738: [U-Boot] Update U-Boot to 2017.01
0003737: [U-Boot] Update U-Boot to 2016.11
0003736: [U-Boot] Update U-Boot to 2016.09
0003735: [U-Boot] Update U-Boot to 2016.07
0003734: [U-Boot] Update U-Boot to 2016.05
0003732: [U-Boot] Update U-Boot to 2016.03
0003729: [U-Boot] Update U-Boot to 2016.01
0003727: [U-Boot] Update U-Boot to 2015.10
0003760: [U-Boot] RPMsg ring buffer allocation fails with Kernel 4.9
0003759: [U-Boot] loadaddr is modified by several commands
0002680: [U-Boot] Update U-Boot to 2015.07
0002679: [U-Boot] Update U-Boot to 2015.04
0003746: [U-Boot] Add display support for fsimx6sx and fsimx6ul to U-Boot
0002523: [U-Boot] Update U-Boot to 2015.01
0002522: [U-Boot] Update U-Boot to 2014.10
0003758: [Display] Remove duplicate code for display clocks
0003757: [U-Boot] Move F&S common code to a common directory
0003756: [U-Boot] Switch F&S platforms to CONFIG_SYS_GENERIC_BOARD
0003755: [U-Boot] Reduce differences to mainline U-Boot
0003754: [U-Boot] Switch back to zImage for Linux kernel
0003753: [eMMC] eMMC with 4GB does not work in Pseudo-SLC mode
0003745: [U-Boot] Add display support for fsimx6 to U-Boot
0003752: [U-Boot] F&S source files still have license messages, should be SPDX identifier
0003751: [U-Boot] Add support for PicoCoreMX6SX to U-Boot
0003750: [U-Boot] Add support for PicoCoreMX6UL to U-Boot
0003749: [U-Boot] Add support for PicoCOMA7 to U-Boot
0003748: [U-Boot] With display support activated, U-Boot is bigger than 512KB
0003747: [U-Boot] On i.MX6, show more clocks in command clocks
0003724: [WLAN] Bluetooth does not restart after reboot
0003476: [U-Boot] QBlissA9r2: timeout on tftp boot strategy
31 issues View Issues
0003852: [U-Boot] Add original U-Boot for i.MX7ULP for U-Boot
1 issue View Issues
0003723: [U-Boot] Add support for i.MX6ULL to U-Boot (optionally used on efusA7UL)
1 issue View Issues
0003722: [Display] Image on ET070080 is sometimes shifted to the left on efusA9
0003721: [PCIexpress] Add support for PCIe on fsimx6sx
2 issues View Issues
0003715: [U-Boot] Add support for CONT1 to U-Boot
0003716: [U-Boot] Add Cortex-M4 support for i.MX6SX/fsimx6sx
0003706: [U-Boot] Patch device tree on-the-fly for run-time detected features
0003720: [U-Boot] CONFIG_NETCONSOLE does not work
0003719: [U-Boot] Add support for QBlissA9r2 to U-Boot
0003710: [eMMC] Add eMMC support to U-Boot
0003718: [U-Boot] Add option to U-Boot to use USB OTG port as a second host port
0003717: [U-Boot] Result of command in then or else part of if can not be evaluated after if
0003698: [U-Boot] Add support for PicoCOMA9X to U-Boot
0003714: [U-Boot] The DEL key does not work on the command line in U-Boot
0003713: [Ethernet] Ethernet PHYs are active in Linux after booting even if Network is never used
0003711: [U-Boot] Check GPIO to decide between Recover and Update procedure
0003709: [U-Boot] efusA9 does not boot with 2GB RAM
0003708: [U-Boot] Add support for GAR1 to U-Boot
0003707: [U-Boot] udelay() delays too long
0003703: [U-Boot] Add support for NetDCUA9 to U-Boot
0003700: [U-Boot] Add support for PicoCOM1.2 to U-Boot
0003705: [Ethernet] WLAN can not have an own MAC address
0003704: [U-Boot] Drop mach-ID stuff from code, handle board features similarly on F&S boards
0003701: [U-Boot] Add blinking LED support for i.MX6UL
0003699: [U-Boot] Add support for Cube2.0 to U-Boot
0003336: [U-Boot] Support for auxiliary core (Cortex-M4) in UBoot
22 issues View Issues
0002441: [Hardware] Add support for HGATEWAY in U-Boot
0002678: [U-Boot] Add support for LEDs on HGATEWAY
0002067: [USB host] Add support for USB host on Vybrid
0002373: [U-Boot] _kernel_nfs, _kernel_usb* and _kernel_mmc* are missing the bootm command
0002348: [Ethernet] Add ethernet clock source detection for fsvybrid in U-Boot
5 issues View Issues
0003568: [USB host] Some USB sticks have timeouts when loading the rootfs image
0003574: [U-Boot] Add default installation path for RAM on F&S boards
0003569: [U-Boot] Improve F&S boot strategy environment
0003573: [U-Boot] Drop architecture from F&S device tree names
0003572: [U-Boot] Add support for armStoneA9R2
0003571: [U-Boot] U-Boot fails to compile with GCC-5
0003570: [U-Boot] Add status LED support for fsimx6
7 issues View Issues
First version for i.MX6 SoloX
0003100: [U-Boot] Change fsimx6 to use device trees in the future
0003098: [U-Boot] Set bootfdt variable to allow for generic FDT loading
0003097: [USB host] Do not power-cycle USB hub ports
0003096: [Ethernet] Ethernet does not work on NetDCUA5 board 1.21
0003095: [NAND-FMD] Add nand convert command for fsvybrid
5 issues View Issues
0003092: [NAND-FMD] NAND flash is sometimes corrupted
0003094: [U-Boot] Add support for loading FDT from UBI on F&S boards
0003093: [U-Boot] Blinking LEDs are not possible anymore on fsvybrid in u-boot-2014.07
3 issues View Issues
First release for i.MX6 UltraLite
0003090: [Ethernet] Improve ethernet environment
0003091: [SD/MMC] On u-boot-2014.07, SD card does not work correctly
0003087: [U-Boot] Add support for efusA7UL
0003089: [Ethernet] Use fec_mxc driver on fsvybrid
0003088: [Ethernet] Add support for second ethernet port on fsimx6sx
0003086: [Ethernet] Add support for Micrel KSZ8081 ethernet PHY
0003083: [U-Boot] Add support for i.MX6 SoloX (fsimx6sx)
0003085: [U-Boot] Add support for i.MX6 UltraLite (fsimx6ul)
0003084: [U-Boot] Add support for efusA9X
0002521: [U-Boot] Update U-Boot to 2014.07
0003082: [U-Boot] Move update code from cmd_source.c to cmd_update.c
0002520: [U-Boot] Update U-Boot to 2014.04
0002681: [SD/MMC] Environment: Add rootwait for slow boot devices, activate AUTO_COMPLETE, fix ubifs devices
13 issues View Issues
0003081: [U-Boot] Convert fsvybrid to compile in THUMB mode
0002677: [U-Boot] Improve and simplify F&S environment, hide boot strategy variables
0002676: [U-Boot] Improve update infrastructure on F&S boards
0002675: [USB host] Add earlyusbinit to do an early USB device scan
0002674: [SD/MMC] Add SD card support for fsimx6 boards in U-Boot
0002673: [Ethernet] Add ethernet support for PicoMODA9
0001881: [NAND-FMD] NAND flash initialisation sometimes fails on bootup
0002568: [NAND-FMD] Add new F&S NAND access for i.MX6 to U-Boot
0002567: [U-Boot] Add support for i.MX6 DualLite/Solo on fsimx6
0002518: [U-Boot] Update U-Boot to 2013.10
0002566: [U-Boot] Join U-Boot code for PicoCOMA8 with common F&S U-Boot
0002519: [U-Boot] Update U-Boot to 2014.01
0002517: [U-Boot] Update U-Boot to 2013.07
0001845: [U-Boot] Update to mainline U-Boot version. This version already includes proper USB and SDHC support.
0002039: [U-Boot] Join i.MX6 U-Boot with Multi-Platform-Linux
0002516: [U-Boot] Update U-Boot to 2013.04
0002515: [U-Boot] Update U-Boot to 2013.01
0002514: [U-Boot] Update U-Boot to 2012.10
18 issues View Issues
0002332: [NAND-FMD] Switch NAND handling on fss5pv210 and fss3c64xx to fsvybrid style
0002313: [NAND-FMD] Handle blank pages with bitflips in U-Boot on fsvybrid
0002311: [Production/Installation] Fix install script to use new boot strategy
0001412: [General] Switch to hush parser to have control structures like if...then...else...fi
0002307: [NAND-FMD] Don't reduce NAND size by skip amount
5 issues View Issues
New NAND flash driver, block refresh, new boot strategies, Ethernet improvements
0002291: [Ethernet] Add support for Micrel PHY 8081RNA on armStoneA5, NetDCUA5, AGATEWAY in U-Boot
0002290: [U-Boot] Add support for blinking status LEDs on Vybrid
0002278: [NAND-FMD] Fix NAND read/write commands in case of bad blocks
0002292: [U-Boot] Join cubea5.h and fsvybrid.h
0002275: [General] Pass NBoot-Args to Linux
0002166: [NAND-FMD] Add support for block refreshing in U-Boot on Vybrid
0002165: [NAND-FMD] Support 16-bit Hardware-ECC on Vybrid
0002193: [U-Boot] Switch to more flexible boot strategy selection
0002161: [NAND-FMD] Flash based Bad Block Table conflicts with UBI on TargetFS
0002164: [NAND-FMD] Change mtdparts layout to support new NBootVyb >= VN08
0002162: [SD/MMC] Add support for ESDHC0 on Vybrid in U-Boot
0002163: [Ethernet] On Vybrid read MAC addresses from OTP fuses if set
0002044: [Ethernet] Store Ethernet MAC address in Controller
0002072: [Ethernet] Improve Ethernet implementation
0002160: [U-Boot] Add support for Afriso Gateway
15 issues View Issues
0002091: [U-Boot] Add support for on-board LEDs
0002073: [U-Boot] Improve Update/Install to handle script in RAM and UBIFS, add recovery
0002068: [U-Boot] Add support for 500MHz on Vybrid
3 issues View Issues
0002018: [Production/Installation] Checking an install/update device fails if the device list contains blanks
0002017: [General] Add support for CUBEA5
2 issues View Issues
0002016: [General] Set $platform variable in lower case
0002013: [General] Remove unused Samsung stuff
0002015: [General] Pass board revision to Linux kernel via ATAG structure
0002014: [Serial Driver/Interface] Patch serial port for Linux zImage uncompressor
0002012: [SD/MMC] Remove some remaining stuff from F&S SD/MMC driver
0002011: [General] Join armStoneA5, PicoCOMA5 and NetDCUA5 to one common fsvybrid platform
0002009: [Serial Driver/Interface] Implement serial driver for fsvybrid in the same way as fss5pv210
0002010: [General] Fix ugly implementation for reset cause
0002008: [General] Merge U-Boot for fsvybrid and fss5pv210
0002007: [General] Add support for NetDCUA5
10 issues View Issues
0001864: [U-Boot] MAC address not passed into kernel
1 issue View Issues
0001837: [U-Boot] Add U-BOOT pattern to detect image type in Nboot
1 issue View Issues
0001814: [NBoot] Receive boot parameters from NBoot
0001727: [General] Rename board specific implementation to a common name usable for all modules from F&S: mx6q_qblissa9 -> mx6q_fs
0001567: [Kernel] Use ATAG param to pass hardware specific information into kernel.
0001548: [Hardware] Detect board HW revision
0001543: [Ethernet] Assert nRST during init (HW rev. 1.20).
5 issues View Issues
First preliminary release of Vybrid platform
0001604: [General] Setup environment for NAND and configure default settings
0001721: [Ethernet] Use internal PLL to generate clock for ETH PHY is unstable
0001667: [U-Boot] Setup for RMII_CLKOUT
3 issues View Issues
0001488: [NAND-FMD] Increase kernel partition size
0001466: [U-Boot] Add new bootcmd evironment variables to combine net-mmc and net-nand boot staggies
0001465: [U-Boot] Add GBit Ethernet support
3 issues View Issues
Released 2012-11-22
0001413: [General] Set environment variable for board name and architecture
0001326: [U-Boot] Rebase U-Boot to 2012.07
0001290: [U-Boot] Correct 'bootnfsdhcp' command line in FSS5PV210 configuration file
0001273: [Serial Driver/Interface] Improve serial driver for S3C64XX to allow CONFIG_SERIAL_MULTI
0001272: [U-Boot] Allow a dynamic environment size depending on NAND flash type
0001262: [U-Boot] Add support for PicoMOD7A and NetDCU14
0001259: [U-Boot] Combine PicoCOM3 and PicoMOD6 to a common S3C64XX platform
0001258: [NAND-FMD] Support different ECC computation modes for NBoot and the other partitions in NAND
0001257: [NAND-FMD] Allow dynamic MTD partition sizes depending on NAND flash type
0001256: [NAND-FMD] Allow NAND flashes with different block sizes
0001254: [U-Boot] Add commands update and install to manually trigger update/installation
0001253: [U-Boot] Long filenames not fully supported on VFAT devices
0001255: [SD/MMC] fss3c64xx: Switch from F&S NBoot driver to generic MMC driver
0001328: [U-Boot] Allow special argument value '.' to keep the default value
0001260: [Serial Driver/Interface] Allow different serial debug ports depending on board type
0001327: [SD/MMC] fss5pv210: Fix generic sdhci driver
0001333: [U-Boot] Improve update function (previously called autoload)
17 issues View Issues
0001464: [General] Create first U-Boot version for QBlissA9 (based on 2009-08)
1 issue View Issues
0000940: [SD/MMC] SD card not detected for autoload
1 issue View Issues
0000928: [USB host] USB stick not detected during boot
1 issue View Issues
0000940: [SD/MMC] SD card not detected for autoload
1 issue View Issues
0000928: [USB host] USB stick not detected during boot
1 issue View Issues
0006526: [General] [PCoreMX8MMr2-LPDDR4] Fix name for new display Device-Tree from PicoCoreMX8MMr2-LPDDR4
0006523: [General] Add support for OSM8MM
2 issues View Issues
Pre-Release für PicoCoreMX93 und OSM93 abgeschlossen
0006448: [General] Extend image_types_fus.bbclass to build multiple images
0006447: [General] fsimx93: Extend machine configuration to disable ptest for qt packages
0006446: [General] Add qtwayland_%.bbapend
0006445: [General] Add qtlanguageserver_%.bbapend
0006444: [General] Improve 0001-Set-file-system-RW.patch
0006443: [General] Add qtdeclarative_%.bbapend
0006442: [General] Add qtbase_%.bbapend
0006441: [General] Add imx-alsa-plugins_%.bbapend
0006440: [General] Rework imx-boot_1.0.bbappend
0006439: [General] Rework fsimx93.conf to support multiple u-boot configurations
0006438: [General] Improve KERNEL_DEVICETREE in fsimx93.conf
0006437: [General] Move wic directory to meta-fus-bsp
0006436: [General] Remove default created getty tty1 service
0006435: [General] Improve packagegroup-qt6-fsimx.bb
0006434: [General] Remove 0001-lib-build_OID_ patch
0006433: [General] Improve alsa-state to deploy asound configuration
0006432: [General] Improve handling of NXP wifi mxm-wifiex driver
0006431: [General] Improve fsimx93.conf
0006430: [General] Restructure meta-fus layers
0006429: [General] Fix osm device tree names
0006428: [General] Fix image_types_fus
0006427: [General] Update layer to scarthgap
22 issues View Issues
0006355: [General] Update meta-fus to kernel version 5.15.160
1 issue View Issues
0006242: [General] Add touchscreen calibration for SX8654
0006241: [General] Remove fbi image viewer tool from fus-image-std
0006240: [General] Update fsimx6 machine to Yocto 4.0
3 issues View Issues
0006196: [General] Adapt fus-uboot-bootpart.wks
0006195: [General] Update fsimx6ul machine to Yocto 4.0
2 issues View Issues
0006183: [General] conf:machine:fsimx93: enable 2d acceleration
0006184: [General] Improve linux-fus recipe for fsimx93
0006182: [General] Rework meta-fus structure
3 issues View Issues
0006189: [General] Update fsimx8mn machine to Yocto 4.0
1 issue View Issues
0005977: [General] Improve uboot update script for nand
0005976: [General] Remove Kernel Image from the rootfs
0005975: [General] Update fsimx8mm u-boot to 2021.04
0005888: [General] Add psplash package to standard image configuration
4 issues View Issues
0005921: [General] Add update script for updating NBoot, U-Boot and sysimg
0005920: [General] Remove U-Boot from sysimg
0005919: [General] Set default Linux terminal to vt100
0005918: [General] Add layer versions to the final image
0005917: [General] Add image for fsimx8mp basler camera support
0005916: [General] Fix out-of-tree kernel module building
0005915: [General] Add asound.state for wm8960 codec
0005914: [General] Add new packages to fus-image-std: fiwared, can-utils, libgpiod-tools, spitools
0005913: [General] Update meta-fus to Kirkstone (Yocto 4.0)
0005912: [General] Create standalone meta-fus repository
0005281: [CAN] Use can-utils instead of canutils
0005829: [Audio] Add dmix as default for asound.conf
0005681: [Audio] [PCore8MP] Audio record is not working
0005701: [WLAN] Add new mxm-wifiex driver to Yocto for Azurewave WLAN
0005797: [Display] efusmx8mp: Touch calibration values for RGB display not correct
15 issues View Issues
0005677: [General] fsimx8mp: Mount rootfs in rw mode
1 issue View Issues
Released by Anatol Derksen
0005659: [General] [imx-atf]: Add patches for fsimx8m(m,n,p) to imx-atf_2.2.bbappend
0005658: [General] Add support for fsimx8mp
0005657: [General] Fix partition sizes and offsets in WKS file
3 issues View Issues
0005560: [General] Improve fsimx6 machine
1 issue View Issues
0005547: [General] Fix fsimx8mm devicetree conf
1 issue View Issues
0005394: [General] Add M4 image to the emmc sysimg file of fsimx7ulp
0005393: [General] Fix environmentvariable TERM being set to @BAUDRATE@
0005391: [General] Create symlink for emmc-${MACHINE}.sysimage file
0005390: [General] Use newer weston-imx version
0005388: [General] Fix fs-installscript.bb form 32-Bit ARM targets
0005163: [General] The yocto-download script does not download the meta-mono layer anymore
0005387: [General] Add error handling for the install script with eMMC
0005386: [General] Fix passing of ethaddr for Silex WLAN module
0005385: [General] Improve tbs2 machine file
9 issues View Issues
0005202: [General] Add error handling for the install script with eMMC
0005201: [General] Fix passing of ethaddr for Silex WLAN module
2 issues View Issues
0005336: [General] Fix passing of ethaddr for Silex WLAN module
0005335: [General] Add firmware for sd8997
0005334: [General] Add support to build install.scr
0005333: [General] Fix core-image-minimal build
0005332: [General] Add updated device trees to fsimx6ul.conf
0005331: [General] Fix download for meta-mono layer
6 issues View Issues
0004270: [General] [fsimx-all] No login tty at the debug console at non fus-images
0005200: [General] Add fs-startscript for core-image-minimal
0005199: [General] Add display support for target fsimx8mn
0005198: [General] Improve support for target image fus-image-std
4 issues View Issues
0005197: [General] Add touch calibrator for Weston
0005196: [General] Improve support for target fsimx8mn to work in a correct way
0005195: [General] Remove archiving of sysimg
3 issues View Issues
0005192: [General] Update Yocto to NXP 5.4.70-2.3.2 release
0005193: [General] Add support for target fsimx8mp
0005191: [General] Remove xf86-input-libinput from XServer
3 issues View Issues
0005185: [General] Improve fsimx8mm machine file
0005189: [General] Improvements to support Yocto version 3.0 (Zeus)
0005186: [General] Improve target image fus-image-std
0005190: [General] Add support for FuS update framework
0005188: [General] Update yocto to work with kernel version 5.4.70
0005187: [General] Add new firmware for atmel touch mxt336
0005184: [General] Add machine for fsimx8mx-nano
7 issues View Issues
0005183: [General] Improve support for WIFI module 1MW from murata
0005182: [General] Remove kernel image from rootfs
0005181: [General] Remove kernel-module-imx-gpu-viv from linux-fus recipe
0005180: [General] Add support for target fsimx8mx
0004509: [General] Update Yocto to 3.0 (Zeus)
5 issues View Issues
0005194: [General] Improve support for target fsimx8mn
1 issue View Issues
0004508: [General] Update Yocto to 2.5 (sumo)
1 issue View Issues
0005179: [General] Add support for target fsimx7ulp under Yocto
1 issue View Issues
0004188: [General] Update Yocto to 2.4 (Rocko)
1 issue View Issues
0005146: [WLAN] MAC address does not get passed through for Silex WLAN module
1 issue View Issues
Released 2011-07-06
0000618: [Kernel] high battery power consumption on linux
1 issue View Issues
Released 2012-09-17
0001319: [NBoot] Support for Password and PM1 compatibility added
1 issue View Issues
Released 2012-07-25
0001170: [NBoot] PM7-L1 reports wrong memory size
1 issue View Issues
Released 2012-07-10
0001126: [NBoot] Optimized NAND flash timing
0001121: [NBoot] Output clock speed in NBoot menue
0001120: [NBoot] Add new command to read nboot/eboot/uboot from NAND flash
0001119: [NBoot] Add support for 512MB RAM
4 issues View Issues
Released 2012-01-11
0000878: [NBoot] Output version of NBOOT when load over serial or from SD
0000876: [NBoot] Add support for PicoCOM5
0000877: [NBoot] Improve boot time
3 issues View Issues
Released 2011-12-16
0000871: [NBoot] Add support for 128MB flash
0000870: [NBoot] Command s sometimes not work
0000840: [NBoot] Improve stability of USB in NBOOT
0000839: [NBoot] Add support for 12MHz USB crystal/osc
4 issues View Issues
Released 2011-09-23
Name changed to nbootc100_11.bin.
0000787: [NBoot] Read config pins to switch ARMCLK between 666MHz and 834MHz.
0000786: [NBoot] Clock speed of ARMCLK and memory clock is wrong
2 issues View Issues
Released 2012-08-09
Released at 2012-03-16
0001223: [RTC] Added support for RTC (Real Time Clock)
0001222: [DIO] Added support for GPIO (SYSFS), to configure/use gpios from userspace
0001221: [Audio] Added support for Audio with TLV320AIC23 controller
0001220: [SPI] Added support for SPI, spi-0 (user), spi-1 (CAN)
0001219: [I2C] Added support for I2C, i2c-0 (audio controller), i2c-1 (user)
0001218: [NAND-FMD] Added support for NAND Flash
0001217: [Display] Added support for LCD (LVDS and D-RGB)
0001216: [Touch driver] Added support for dedicated resistive 4-wire touch
0001215: [Serial Driver/Interface] Added support for UART2 (debug/console), UART1 (user) not tested, UART0 (user)
0001212: [SD/MMC] Added support for MMC, ch-0 working, ch-2 (uMMC) not working
0001211: [USB host] Added support for USB Host
0001210: [CAN] Added support for CAN with MCP2525 controller
0001209: [Ethernet] Added support for Ethernet with AX88796 controller
13 issues View Issues
Released 2012-08-09
Released at 2012-07-05
0001227: [WDT] Added support for Watchdog Timer
0001225: [MFC driver] Add support for MFC (Multi Format Codec)
0001224: [PWM] Add support for PWM
0001213: [SD/MMC] ch-2 (uMMC) not working.
0001226: [General] Update Kernel Source to v2.6.29
5 issues View Issues
Released 2013-05-28
0001763: [NBoot] NetDCU14 Rev 1.20 redefines speed jumper to flash size
0001762: [NBoot] read from bootconfig pins sometime gets wrong settings
2 issues View Issues
Released 2012-11-28
0001437: [NBoot] PM7A-L2: Configure 24Bit LVDS converter for falling edge.
1 issue View Issues
Released 2012-11-21
0001421: [NBoot] Add ubotv210.nb0 as possible load source
0001428: [NBoot] Ram test not working for 512 MB version
0001426: [NBoot] Small change in SDHC clock calculation
3 issues View Issues
Released 2012-10-30
0001405: [NBoot] PM7A: Detect config jumper UARTSEL
0001404: [NBoot] Enable QoS_fast for memory access
2 issues View Issues
Released 2012-10-30
0001367: [NBoot] Always detects digital RGB interface
1 issue View Issues
Released 2012-07-29
0001070: [NBoot] Add support for nanoRISC
0001278: [NBoot] If started from SD card, run actions.txt automatically if it exists.
0001280: [NBoot] Add empty commands '\r' and '\n' to re-display menu
0001166: [NBoot] ND14: Some config pins are not configured with pull down
0001167: [NBoot] Add support for PicoMOD7A
0001182: [NBoot] wrong PCB revision displayed
0001069: [NBoot] Add support for 512MB NAND flash
7 issues View Issues
Released 2012-05-02
0001014: [NBoot] Add support for NetDCU14
0001027: [NBoot] Add new command to read nboot/eboot/uboot from NAND flash
0001026: [NBoot] NAND flash Micron 128MB doesn't work
3 issues View Issues
Released 2012-04-13
0001010: [NBoot] Add detection of 2nd LAN controller.
1 issue View Issues
0001645: [CAN] Add CAN support
1 issue View Issues
First preliminary release of Vybrid platform
0001733: [Ethernet] Add Ethernet support (ETH1)
0001646: [SPI] Add SPI support
0001642: [AIN] Add ADC1 support
0001644: [USB host] Add USB Host support
0001641: [AIN] Add ADC0 support
0001603: [SD/MMC] Add SD/MMC support
0001602: [Ethernet] Add Ethernet support
0001601: [Touch driver] Add SX8655 touch controller
0001600: [NAND-FMD] Add NAND Flash controller
0001599: [Audio] Add SGTL5000 controller
0001598: [Display] Calculate LCD clock divisor dynamically
0001597: [Display] Default LCD configuration
0001734: [USB device] Add USB Device support
0001668: [Audio] Setup SAI2 to use PLL4
14 issues View Issues
First preliminary release of Vybrid platform
0001715: [General] Kernel blocks on initialising L2x0 outer cache controller
0001713: [SD/MMC] Add SD/MMC support
0001710: [NAND-FMD] Add NAND Flash controller
0001717: [Audio] Add SGTL5000 controller
0001708: [Ethernet] Add Ethernet support
0001711: [USB host] Add USB Host support
0001709: [Display] Add LCD support for D-RGB
7 issues View Issues
First preliminary release of Vybrid platform
0001725: [General] Pull from remote repository
0001608: [General] Pull from remote repository
0001607: [General] Pull from remote repository
0001606: [General] Initial Commit
4 issues View Issues
Released 2021-02-25
0004631: [NBoot] add reboot command
0004632: [NBoot] change NAND erase function keys
0004633: [NBoot] add BadBlock check function
0004634: [NBoot] add NAND test
0004635: [NBoot] mark and check BadBlock marker in first tree pages of block
0004636: [NBoot] add NAND functions for raw access
0004637: [NBoot] fix error in ldscript
0004638: [NBoot] fix Makefile for changes in ldscript
0004630: [NBoot] remove USB functionality
9 issues View Issues
Released 2017-08-15
0001724: [Serial Driver/Interface] Enable internal Pull-Ups on Serial interface pins by default
0003286: [NBoot] New flash not detected
2 issues View Issues
Released 2012-09-25
0001325: [SD/MMC] Initialize SD-Pins only when required
1 issue View Issues
Released 2012-01-09
0000887: [NBoot] Verify NBoot checksum before storing into flash.
0000886: [NBoot] Add support for additional 128MB memory chip.
2 issues View Issues
Released 2011-11-23
0000885: [NBoot] Add support for 128MB of RAM.
0000884: [NBoot] Correct detection of HW revision
0000883: [NBoot] Remove automatic deployment supported.
3 issues View Issues
Released 2011-05-18
0000882: [NBoot] SD boot needs updated. Remove some debug messages.
0000881: [NBoot] Some modifications are requried for automatic deployment process.
2 issues View Issues
Released 2011-04-28
0000880: [NI2C] Add possibility to store UBoot into flash
1 issue View Issues
Released 2011-04-14
0000879: [NBoot] Add SD card support
1 issue View Issues