Scheduled For Release 2023-06-30
0006218: [Kernel] [i.MX6] ADP-mPCIe-Wlan does not work
0006215: [General] Increase delay after HW reset for Realtek Phy to 100ms
0005898: [Display] [efusMX8MP] SPI-NAND is not working correctly
0005897: [Audio] [i.MX8MP] SGTL5000 is not working after deep sleep
0005794: [Display] efusmx8mp: Wrong PWM brightness values for the default displays
0006193: [Kernel] Add display support for BT070L1060CS0I1AD on PicoCoreMX6UL100
0006115: [Kernel] Update fsimx6sx boards to kernel 5.15
0006028: [Kernel] Update fsimx6ul boards to kernel 5.15
0005979: [Kernel] Use new naming convention for PicoCoreMX8MM boards
0005896: [Audio] [i.MX8MP] HDMI audio is not working
0005895: [Ethernet] Ethernet breaks when both phys are up but only one connected
0005843: [Kernel] The bdinfo driver gives wrong hexvalues for multiple reads on the same file
0005827: [Kernel] [PCoreMX8MM/MN] GPIO5_IO17 is muxt wrong in the DTS
0005899: [Kernel] Update do Kernel 5.15.71
0005337: [Kernel] Add support for power on/off key
10 of 15 issue(s) resolved. Progress (66%). View Issues
Scheduled For Release 2023-06-30
0006111: [Buildroot] Update fsimx6sx boards to Buildroot 2024.01
0006033: [Buildroot] Update fsimx6ul boards to Buildroot 2023.02
2 of 2 issue(s) resolved. Progress (100%). View Issues
Scheduled For Release 2023-06-30
0005694: [Ethernet] Change led-link from "0" to "2"
0006116: [U-Boot] Remove SHA256 support for fsimx6sx
0006112: [U-Boot] Update fsimx6sx boards to U-Boot 2021.04
0006030: [U-Boot] Remove SHA256 support for fsimx6ul
0006031: [U-Boot] Update fsimx6ul boards to U-Boot 2021.04
0006004: [U-Boot] Fix default entry for environment in NAND
0005940: [U-Boot] F&S Update for files bigger that 2GB fails
6 of 7 issue(s) resolved. Progress (85%). View Issues
Scheduled For Release 2023-06-30
0005991: [General] Add dynamic layer depenencies
0006196: [General] Adapt fus-uboot-bootpart.wks
0006195: [General] Update fsimx6ul machine to Yocto 4.0
0005829: [Audio] Add dmix as default for asound.conf
0005797: [Display] efusmx8mp: Touch calibration values for RGB display not correct
4 of 5 issue(s) resolved. Progress (80%). View Issues