0003685: [Kernel] Add fsvybrid support to F&S Kernel 4.1.15 0005117: [Ethernet] eth1 does not work on armStoneA5.2

0003768: [Buildroot] Add support for Kernel 4.1.x to fsvybrid

0004208: [General] [i.MX7ULP] [DO NOT CLOSE] Check version of python-erpc package 0005268: [Buildroot] Bump busybox from 1.33.0 to 1.33.2 0004306: [General] [i.MX6_All] BR2_PACKAGE_LIBGTK3 does not build on X11 configs 0004377: [Buildroot] Add support for fsimx8mm

0004380: [General] [i.MX6UL] Create PicoCOMA7 release

0004395: [General] Create PicoCoreMX6UL release to support eMMC as boot device

0005578: [General] Add armStoneA9r3 Devicetrees to fsimx6 building targets

0006008: [Buildroot] Add F&S Kernel and U-Boot versioning 0006009: [Buildroot] Add F&S psplash bootscreen 0006007: [Buildroot] Update IMX specific packages to NXP Yocto version lf-5.15.71-2.2.1 0006006: [Buildroot] Update to Buildroot 2023.02.6

0006111: [Buildroot] Update fsimx6sx boards to Buildroot 2024.01 0006033: [Buildroot] Update fsimx6ul boards to Buildroot 2023.02

0006232: [Buildroot] Update fsimx6 boards to Buildroot 2024.01

0003712: [U-Boot] Switch fsvybrid to kernel 4.1.x 0002443: [Serial Driver/Interface] Serial overflow results in off-by-one error on serial line 0002281: [NAND-FMD] ubi part does not work if the current UBI partition is erased with nand erase 0002071: [U-Boot] Check timer implementation

0004379: [General] [i.MX6UL] Create PicoCOMA7 release

0004397: [General] Create PicoCoreMX6UL release to support eMMC as boot device

0005983: [U-Boot] Add option -b to fsimage save to select boot partition 0006191: [U-Boot] Update Secure Boot to new release 0006192: [U-Boot] Update fsimx8mn to U-Boot 2021.04 0006190: [U-Boot] Add support for loading secondary SPL and Uboot 0006065: [U-Boot] [PCoreMX8MMr2] Ethernet led is not configured correctly 0006064: [U-Boot] [REALTEK PHY] ALDPS mode is not enabled and EEE LED indication is not disabled 0006063: [U-Boot] [FSIMX8MM] Ethernet is still enabled after booting into linux 0006005: [U-Boot] Addfsheader.sh: Check for crc32 and xxd before using them 0005986: [U-Boot] Update fsimx8mm architecture to Uboot 2021.04 0005985: [U-Boot] On fsimx8mm, add old device tree names for compatibility 0005984: [U-Boot] Add command fsimage boot to show current boot settings 0005982: [U-Boot] Drop board revision from BOARD-CFG names 0005939: [U-Boot] Uboot is now located in the boot partition of eMMC 0005937: [U-Boot] Relocate U-Boot and Environment in fsimage save if needed 0005938: [U-Boot] Have new NAND/MMC layouts for fsimx8mm/mn/mp 0005936: [U-Boot] Nboot can now be written to NAND flash with U-Boot 0005935: [U-Boot] Introduce crc32 checksums for fsimage save command 0005934: [U-Boot] Fix bootaux command 0005933: [U-Boot] Improve Uboot versioning 0005932: [U-Boot] Update to NXP u-boot-2021.04

0005694: [Ethernet] Change led-link from "0" to "2" 0006116: [U-Boot] Remove SHA256 support for fsimx6sx 0006112: [U-Boot] Update fsimx6sx boards to U-Boot 2021.04 0006030: [U-Boot] Remove SHA256 support for fsimx6ul 0006031: [U-Boot] Update fsimx6ul boards to U-Boot 2021.04 0006004: [U-Boot] Fix default entry for environment in NAND 0005940: [U-Boot] F&S Update for files bigger that 2GB fails

0006194: [U-Boot] Uboot for fsimx6ul-Y2024.03

0006233: [U-Boot] Update fsimx6 boards to U-Boot 2021.04