UBoot - Roadmap

0003712: [U-Boot] Switch fsvybrid to kernel 4.1.x 0002443: [Serial Driver/Interface] Serial overflow results in off-by-one error on serial line 0002281: [NAND-FMD] ubi part does not work if the current UBI partition is erased with nand erase 0002071: [U-Boot] Check timer implementation

0004379: [General] [i.MX6UL] Create PicoCOMA7 release

0004397: [General] Create PicoCoreMX6UL release to support eMMC as boot device

0006417: [U-Boot] [FSIMX8MP] Improve feature selection in board file 0005983: [U-Boot] Add option -b to fsimage save to select boot partition 0006462: [U-Boot] [EFUSMX8MP] Fix USB device in Device-Tree 0006461: [U-Boot] [FSIMX8M*] Support files up to 64MB for bootm 0006460: [U-Boot] Add fs_selftest support 0006459: [U-Boot] Add board-cfg entries to bdinfo in Linux kernel 0006458: [U-Boot] [PCoreMX8MP/r2] Fix first access for sd cards 0006457: [U-Boot] [FSIMX8MP] For saveenv check if the current HW partition on eMMC changed 0006456: [U-Boot] [ADP-NDCU2PCORE] Add hotfix configuration for SD_A 0006455: [U-Boot] [FSIMX8MP] Move VLCD_ON and BL_ON to UBoot Device-Tree 0006454: [U-Boot] [FSIMX8MP] Fix handling of slow USB devices for xhci 0006453: [U-Boot] [FSIMX8MP] Move USB handling to UBoot Device-Trees 0006191: [U-Boot] Update Secure Boot to new release 0006192: [U-Boot] Update fsimx8mn to U-Boot 2021.04 0006190: [U-Boot] Add support for loading secondary SPL and Uboot 0006065: [U-Boot] [PCoreMX8MMr2] Ethernet led is not configured correctly 0006064: [U-Boot] [REALTEK PHY] ALDPS mode is not enabled and EEE LED indication is not disabled 0006063: [U-Boot] [FSIMX8MM] Ethernet is still enabled after booting into linux 0006005: [U-Boot] Addfsheader.sh: Check for crc32 and xxd before using them 0005986: [U-Boot] Update fsimx8mm architecture to Uboot 2021.04 0005985: [U-Boot] On fsimx8mm, add old device tree names for compatibility 0005984: [U-Boot] Add command fsimage boot to show current boot settings 0005982: [U-Boot] Drop board revision from BOARD-CFG names 0005939: [U-Boot] Uboot is now located in the boot partition of eMMC 0005937: [U-Boot] Relocate U-Boot and Environment in fsimage save if needed 0005938: [U-Boot] Have new NAND/MMC layouts for fsimx8mm/mn/mp 0005936: [U-Boot] Nboot can now be written to NAND flash with U-Boot 0005935: [U-Boot] Introduce crc32 checksums for fsimage save command 0005934: [U-Boot] Fix bootaux command 0005933: [U-Boot] Improve Uboot versioning 0005932: [U-Boot] Update to NXP u-boot-2021.04

0006514: [U-Boot] [FSIMX8M*] Include imx_tmu driver for fsimx8m(m/n/p) 0006515: [U-Boot] [FSIMX8MM] Fix USB handling for fsimx8mm 0006516: [U-Boot] [FSIMX8M*] Adjust size of CMA only for DRAM > 1GB 0006513: [U-Boot] Add support for OSM8MM 0006466: [U-Boot] Improve boottime for fastboot 0006465: [U-Boot] Support output of checksum in fsimage 0006464: [U-Boot] Add support for armStoneMX8MP Rev 110 0005694: [Ethernet] Change led-link from "0" to "2" 0006116: [U-Boot] Remove SHA256 support for fsimx6sx 0006112: [U-Boot] Update fsimx6sx boards to U-Boot 2021.04 0006030: [U-Boot] Remove SHA256 support for fsimx6ul 0006031: [U-Boot] Update fsimx6ul boards to U-Boot 2021.04 0006004: [U-Boot] Fix default entry for environment in NAND 0005940: [U-Boot] F&S Update for files bigger that 2GB fails

0006194: [U-Boot] Uboot for fsimx6ul-Y2024.03

0006233: [U-Boot] Update fsimx6 boards to U-Boot 2021.04

0006357: [U-Boot] Configure defaut RDC Configuration for the M7 on fsimx8mp 0006452: [U-Boot] [fsimx8mp] Support boards with DRAM greater than 3GB 0006356: [U-Boot] Add loading of secondary Images to fsimx8mp