| | | | 0003101 | | | minor | resolved | V2.30 | V2.30 | 2017-07-03 | At fast plug in some USB devices may not recognized |
| | | | 0002931 | | | minor | resolved | V2.30 | V2.30 | 2017-07-03 | No communication on 10MBit with Autonegotiation |
| | | | 0003041 | | | minor | resolved | V2.8 | V2.8 | 2017-06-28 | Sometimes occurs an exception while boot process |
| | | | 0003257 | | | minor | resolved | V1.4 | V1.4 | 2017-06-28 | Correct checksum calculation |
| | | | 0002057 | | | minor | resolved | V2.8 | V2.8 | 2017-06-27 | Internal pull down not working for IRQ |
| | | | 0002056 | | | minor | resolved | V2.8 | V2.8 | 2017-06-27 | IRQ wrongly configures pull up |
| | | | 0003256 | | | minor | resolved | V2.8 | V2.8 | 2017-06-27 | Plug in a USB device only works one time |
| | | | 0002629 | | | minor | resolved | V2.8 | V2.8 | 2017-06-27 | USB Keyboard doesn't work without USB hub |
| | | | 0003183 | | | minor | resolved | V2.8 | V2.8 | 2017-06-21 | Interrupt stop working after a while when several interurpts triggered |
| | | | 0003074 | | | minor | resolved | V2.20 | V2.20 | 2017-06-21 | Repeated start does not work |
| | | | 0002927 | | | minor | assigned | V3.0 | | 2017-06-21 | Improve the driver by direct access HW current driver uses DIO or I2C interface |
| | | | 0002202 | | | feature | assigned | V3.0 | | 2017-06-21 | Try to short the periode between two bytes within a I2C cycle |
| | | | 0002086 | | | minor | feedback | V3.0 | V2.2 | 2017-06-21 | Set USB device as mass storage device by default on compact 2013 |
| | | | 0001738 | | | feature | new | V3.0 | | 2017-06-21 | Improve IRQ handler for GPIO interrupts |
| | | | 0003040 | | | minor | resolved | V2.30 | V2.20 | 2017-06-21 | Sometimes occurs an exception while boot process |
| | | | 0001690 | | | feature | new | V3.0 | | 2017-06-21 | Implement software SPI driver. |
| | | | 0002135 | | | feature | new | V3.0 | | 2017-06-21 | Add FS-BUS driver |
| | | | 0002359 | | | minor | feedback | V3.0 | | 2017-06-21 | After setting the XPSkin off the grey windows backgrounds are slightly blue |
| | | | 0003240 | | | minor | resolved | V1.10 | V1.10 | 2017-05-19 | efusA9X: System sometimes hangs when changing frequency from 1GHz to 800Mhz |
| | | | 0003238 | | | minor | resolved | V1.3 | V1.3 | 2017-05-18 | RGB: Mode 6 and 19 shows some wrong colors in vertical direction (DriveStrength to low) |
| | | | 0003202 | | | major | resolved | V1.3 | V1.3 | 2017-05-18 | baudrate settings from nboot are not used, always set to 115200 |
| | | | 0002769 | | | minor | resolved | V1.3 | V1.3 | 2017-05-18 | Add new command for setting display memory size (XDS) |
| | | | 0003235 | | | major | resolved | V1.3 | V1.3 | 2017-05-18 | baudrate settings from nboot are not used, always set to 115200 |
| | | | 0003236 | | | minor | resolved | V1.3 | V1.3 | 2017-05-18 | Add new command for setting display memory size (XDS) |
| | | | 0003233 | | | minor | resolved | V1.10 | V1.10 | 2017-05-17 | Background color of buttons don't work |
| | | | 0003232 | | | major | resolved | V1.10 | V1.10 | 2017-05-17 | Bad memory alignment for DMA descriptors and DMA buffers |
| | | | 0003229 | | | minor | resolved | V1.10 | V1.10 | 2017-05-17 | ndcucfg: command "core clock" doesn't report 400MHz or 200Mhz |
| | | | 0003231 | | | feature | resolved | V1.10 | V1.10 | 2017-05-17 | Add support for efusA9x rev 1.20 |
| | | | 0003230 | | | feature | resolved | V1.10 | V1.10 | 2017-05-17 | Add registry settings for efusA9X rev 1.20 |
| | | | 0003227 | | | minor | resolved | V1.3 | V1.3 | 2017-05-11 | RGB: Mode 6 and 19 shows some wrong colors in vertical direction (DriveStrength to low) |
| | | | 0003226 | | | minor | resolved | V2.30 | V2.30 | 2017-05-11 | RGB: Mode 6 and 19 shows some wrong colors in vertical direction (DriveStrength to low) |
| | | | 0003225 | | | feature | resolved | V2.30 | V2.30 | 2017-05-10 | Add 24BPP output width for DRGB interface |
| | | | 0003044 | | | minor | resolved | V2.30 | V2.30 | 2017-05-10 | Background color of buttons don't work |
| | | | 0003224 | | | minor | resolved | V2.30 | V2.30 | 2017-05-10 | Baudrate settings from nboot are not used, always set to 115200 |
| | | | 0003223 | | | feature | resolved | V1.3 | V1.3 | 2017-05-10 | Add support for NetDCUA9 |
| | | | 0002751 | | | feature | resolved | V1.2 | V1.3 | 2017-05-10 | Add support for armStoneA9R2 |
| | | | 0003222 | | | feature | resolved | V1.3 | V1.3 | 2017-05-09 | Enable watchdog only if image is loaded from flash memory. |
| | | | 0003055 | | | minor | resolved | V2.30 | V2.30 | 2017-05-09 | USB host stop working after several hours of operation |
| | | | 0002841 | | | minor | resolved | V2.30 | V2.30 | 2017-05-09 | After unplug and plug in a USB Device after several hours of operation the device may not recognized any more |
| | | | 0002632 | | | minor | resolved | V2.30 | V2.30 | 2017-05-08 | Implement default registry for use of second chip select (efusA9 only) |
| | | | 0002992 | | | feature | resolved | V2.30 | V2.30 | 2017-05-08 | Add support for NetDCUA9 |
| | | | 0003218 | | | major | new | V1.10 | | 2017-05-03 | USB_HVDD connected to 0.9V, should be 3.3V |
| | | | 0003216 | | | minor | new | V32 | | 2017-04-28 | NBoot erases bootloader in case of uncorrectable NAND errors |
| | | | 0003214 | | | feature | resolved | V32 | V32 | 2017-04-26 | boardfeatures for EFUSA9X set incorrectly |
| | | | 0003213 | | | feature | resolved | V32 | V32 | 2017-04-26 | add MAC readout over USB |
| | | | 0003212 | | | minor | resolved | V32 | V32 | 2017-04-26 | button on CUBE20 doesn't work |
| | | | 0003211 | | | feature | resolved | V32 | V32 | 2017-04-26 | add secureboot |
| | | | 0003210 | | | feature | resolved | V32 | V32 | 2017-04-26 | add new board GAR1 |
| | | | 0003122 | | | minor | resolved | V1.00 | V32 | 2017-04-26 | boardfeatures not detected properly after warmboot |
| | | | 0003123 | | | minor | resolved | V1.00 | V32 | 2017-04-26 | reboot with 'r' does not work on UL |
