| | | | 0004746 | | | feature | resolved | V1.40 | V1.40 | 2021-06-17 | Add support for UART6 with RTC/CTS signals (efusA9x only) |
| | | | 0004058 | | [FSiMX6] Serial Driver/Interface | minor | resolved | V3.00 | V3.00 | 2021-06-17 | UARTIntf driver for NetDCUA9 may hang |
| | | | 0004701 | | | minor | resolved | V3.1 | | 2021-06-11 | Add support for FT5426 |
| | | | 0004614 | | | minor | resolved | V1.40 | V1.40 | 2021-06-11 | RTS/CTS are not working |
| | | | 0004712 | | | minor | resolved | V1.60 | V1.60 | 2021-06-11 | PicoCoreMX6UL: New Registry option for polarity of USB VBus enable signal |
| | | | 0004748 | | | feature | resolved | V2.2 | V2.2 | 2021-06-09 | NDA9: Add selftest |
| | | | 0004473 | | | major | resolved | 1.10 | 1.10 | 2021-05-19 | SE050 Schematic Symbol does not match the layout footprint |
| | | | 0004663 | | | minor | resolved | 1.10 | 1.00 | 2021-05-19 | SD_B_VCC Voltage is set incorrect |
| | | | 0004629 | | | minor | resolved | 1.00 | 1.00 | 2021-05-19 | EEPROM does not work properly |
| | | | 0004618 | | | major | resolved | 1.00 | 1.00 | 2021-05-19 | Board crash because of RTC |
| | | | 0004735 | | | minor | resolved | V45 | V45 | 2021-05-18 | change version naming for super secure variant |
| | | | 0004734 | | | feature | resolved | V45 | V45 | 2021-05-18 | use built-in randomizer |
| | | | 0004732 | | | minor | resolved | V45 | V45 | 2021-05-18 | correct DDR3 detection routine |
| | | | 0004723 | | | minor | resolved | V3.1 | V3.1 | 2021-05-18 | Use TSC2004 as default touch driver for NetDCUA5 HW revision >= 1.30 |
| | | | 0004720 | | | minor | resolved | V3.1 | V3.1 | 2021-05-18 | Add support for TSC2004 |
| | | | 0004721 | | | feature | resolved | V1.12 | V1.12 | 2021-05-07 | Output PicoCOM4 or PicoCOM4.2 depending form size of flash |
| | | | 0004717 | | | minor | resolved | V1.60 | V1.60 | 2021-05-07 | PicoCoreMX6UL: correct the order of the RGB components in line patterns |
| | | | 0004716 | | | minor | resolved | V1.60 | V1.60 | 2021-05-07 | Add support for common ILITEK touch modules using protocol V6.X data format |
| | | | 0004714 | | | minor | resolved | V1.60 | V1.60 | 2021-05-05 | PicoCoreMX6UL: Audio driver is not working |
| | | | 0004654 | | | minor | resolved | 1.30 | 1.30 | 2021-05-04 | PicoCore reboots while getting into suspend mode |
| | | | 0004623 | | | minor | resolved | 1.30 | 1.30 | 2021-05-04 | Wrong I2C address setting for U30 |
| | | | 0004624 | | | minor | resolved | 1.30 | 1.30 | 2021-05-04 | Cannot reset USB HUB Port |
| | | | 0004711 | | | minor | resolved | V1.60 | V1.60 | 2021-05-03 | PicoCoreMX6UL: LCD enable signal is active high change it to active low |
| | | | 0004708 | | | feature | new | 1.20 | | 2021-04-23 | Power the Backlight from 3.3V per default |
| | | | 0004707 | | | major | new | 1.30 | | 2021-04-23 | IC2 is not usable for this application (PCA9534 and MAX7315) |
| | | | 0004706 | | | minor | new | 1.20 | | 2021-04-23 | Touch_INT_PCA can not be used with MAX7315 |
| | | | 0004705 | | | minor | new | 1.20 | | 2021-04-23 | Change IC2 to Maxim MAX7315AUE |
| | | | 0004695 | | | minor | resolved | V1.70 | V1.70 | 2021-04-21 | PCOMA7: Adjust selftest for hardware revsion 1.10 |
| | | | 0003407 | | | feature | resolved | V1.70 | V1.70 | 2021-04-21 | Add support for PicoCOMA7 |
| | | | 0004697 | | | feature | resolved | V1.50 | V1.50 | 2021-04-21 | PCOMA7: Adjust driver for hardware revsion 1.10 |
| | | | 0004698 | | | feature | resolved | V1.50 | V1.50 | 2021-04-21 | PCOMA7: Adjust driver for hardware revsion 1.10 |
| | | | 0004449 | | | minor | resolved | V1.50 | V1.50 | 2021-04-21 | Add SYSGEN_LOCALAUDIO |
| | | | 0004602 | | | minor | resolved | V1.40 | V1.40 | 2021-04-19 | Daylight saving time may jumping ahead one hour after each reboot |
| | | | 0003204 | | | minor | resolved | V1.40 | V1.40 | 2021-04-19 | Add bluetooth support for Marvel SDIO8787 |
| | | | 0003141 | | | feature | resolved | V1.40 | V1.40 | 2021-04-19 | Add support for matrix keyboard driver |
| | | | 0004659 | | | feature | resolved | V1.40 | V1.40 | 2021-04-19 | Add WEC2013 updates up to 2020M6 (WEC2013 only) |
| | | | 0003552 | | | tweak | resolved | 1.20 | 1.20 | 2021-04-19 | Power Audio Codec form internal 3.3V |
| | | | 0003725 | | | feature | resolved | 1.10 | 1.20 | 2021-04-19 | Change layout of KSZ8081 for smd stencil |
| | | | 0003884 | | | major | resolved | 1.20 | 1.20 | 2021-04-19 | RTC powerconsumption too high |
| | | | 0004669 | | | minor | resolved | 1.20 | 1.20 | 2021-04-19 | Change RTC to PCF85263ATL |
| | | | 0004121 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | Add IRQ Pin for RTC? |
| | | | 0004385 | | | major | resolved | 1.10 | 1.20 | 2021-04-19 | For the eMMC assambly varaint, the config jumper need to be removed |
| | | | 0004685 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | Change B.CKV.121 to B.CKV.90 |
| | | | 0004686 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | Change TPS73001 to B.ICANA.81 |
| | | | 0004687 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | D1: Use singe Diode instead of Dual Chanel BAT54AW |
| | | | 0004688 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | Add option to power SD1-VCC from internal 3.3V or 1.8V |
| | | | 0004689 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | Add option to power VDD_SNVS from internal 3.3V |
| | | | 0004694 | | | feature | resolved | 1.20 | 1.20 | 2021-04-19 | Change I2C-Flash to TSSOP-8 |
| | | | 0003405 | | | feature | resolved | V1.40 | V1.30 | 2021-04-14 | Add extended block refresh features |
| | | | 0004652 | | | feature | resolved | V1.40 | V1.40 | 2021-04-14 | Wake-up from suspend mode when there is some serial port RX activity |
