View Issue Details

IDProjectCategoryView StatusLast Update
0004534FSiMX6SXEthernetpublic2023-10-16 07:30
Reporterzutter Assigned To 
PrioritynormalSeverityminorReproducibilityhave not tried
Status resolvedResolutionfixed 
Product VersionV1.30 
Target VersionV1.30Fixed in VersionV1.30 
Summary0004534: Disable ETHNETB1, access over ETHNETA1 stops working
DescriptionDisable ETHNETB1, access over ETHNETA1 stops working
Steps To ReproduceInvestigating further this problem, I've found the following problem that you can easily reproduce each time: on working system, when you try to disable ETHNETB1, access over ETHNETA1 stops working!

Complete report
Dear Support Team,




My efusA9X board is configured in the following way:




- ETHNETA1 is using DHCP on 192.168.68.0/255.255.255.0 subnet.

- ATHNETB1 is using static IP address 192.168.0.47/255.255.255.0.




Device is connected to our LAN over ETHNETA1. From time to time, I lose access over ETHNETA1. When this happens, I see over serial UART that machine is still working, so I connect to the device using ETHNETB1, by connecting PC directly to the device. Over remote display, I can see ETHNETA1 is missing IP address. But, when I type ipconfig it does not return! I tried to disable/enable ETHNETA1 from Control Panel/Network And Dial UP Connections but operation blocked. I had to reset the device in order to recover it.




Investigating further this problem, I've found the following problem that you can easily reproduce each time: on working system, when you try to disable ETHNETB1, access over ETHNETA1 stops working!




Can you please check these issues and let me know what could be wrong?




Best regards,




Miodrag Bazdar
Forum Link
Found Driver Version
Fixed Driver Version

Activities

There are no notes attached to this issue.