| | | | 0001899 | | | minor | resolved | V0.20 | V0.20 | 2013-10-07 | Add Support for BusEnum2 |
| | | | 0001900 | | | minor | resolved | V0.20 | V0.20 | 2013-10-07 | Add support for Touch Driver MXT224 |
| | | | 0001901 | | | minor | resolved | V0.20 | V0.20 | 2013-10-07 | Add support for NI2C |
| | | | 0001902 | | | minor | resolved | V0.20 | V0.20 | 2013-10-07 | Add support for ActiveSync |
| | | | 0001903 | | | minor | resolved | V0.20 | V0.20 | 2013-10-07 | Add support for XIP Image |
| | | | 0001895 | | | minor | resolved | V1.7 | | 2013-10-01 | COM3: stop working as soon as COM2: is open |
| | | | 0001850 | | | major | resolved | 1.2 | 1.22 | 2013-09-27 | I2C Clock and DAT exchange |
| | | | 0001874 | | | major | resolved | 1.2 | 1.22 | 2013-09-27 | battery current >1mA for CPU RTC |
| | | | 0001873 | | | minor | resolved | 1.2 | 1.22 | 2013-09-27 | pulldown on LCDPOW and CFLPOW will switch on this power on power on |
| | | | 0001891 | | | major | resolved | 1.22 | 1.22 | 2013-09-27 | USBVBUS is powering board after switchon - switchoff |
| | | | 0001882 | | | minor | resolved | V0.8 | V0.8 | 2013-09-24 | Some IO pins are not working. |
| | | | 0001885 | | | minor | resolved | V1.42 | V1.42 | 2013-09-16 | Change eboot debug message so that eboot prints correct boardname (NetDCU9 or NetDCU9.2) |
| | | | 0001886 | | | minor | resolved | V1.43 | V1.43 | 2013-09-16 | Repartitioning doesn´t work correctly |
| | | | 0001884 | | | minor | resolved | V1.08 | V1.08 | 2013-09-16 | Remove error debug output in case of ERROR_TIMEOUT from IOCTLs. |
| | | | 0001855 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | Adapt PWM support for HW revision 1.10 |
| | | | 0001856 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | Add new serial interface configuration for HW revision 1.10 |
| | | | 0001860 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | Add support for additional serial interface available on HW Rev. 1.10 |
| | | | 0001854 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | Add support for PicoCOMA5 HW Revision 1.10 |
| | | | 0001871 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | ndcucfg does not run on any serial port on NetDCUA5 |
| | | | 0001877 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | Activate missing COM ports |
| | | | 0001876 | | | minor | resolved | V0.8 | V0.8 | 2013-09-06 | Move registry values to separate keys for each board |
| | | | 0001869 | | | feature | resolved | V0.8 | V0.8 | 2013-09-06 | Extend BUSENUM2 for board revision |
| | | | 0001819 | | | minor | resolved | V04 | V05 | 2013-09-04 | GetBootDevice reads wrong values |
| | | | 0001866 | | | minor | resolved | iMX6-V1.2 | iMX6-V1.2 | 2013-09-03 | Add xinput-calibrator application |
| | | | 0001865 | | | minor | resolved | iMX6-V1.2 | iMX6-V1.2 | 2013-09-03 | Add support for SX8655 touch driver |
| | | | 0001864 | | | minor | resolved | iMX6-V1.2 | iMX6-V1.2 | 2013-09-03 | MAC address not passed into kernel |
| | | | 0001853 | | | minor | resolved | iMX6-V1.2 | iMX6-V1.2 | 2013-08-30 | Add backlight driver support for digital RGB adapter |
| | | | 0001862 | | | minor | resolved | V0.5 | V0.5 | 2013-08-29 | Add special driver to correct HW issues related to Rev 1.10 |
| | | | 0001852 | | | minor | resolved | V0.5 | V0.5 | 2013-08-29 | Add FTP server |
| | | | 0001861 | | | minor | resolved | V0.5 | V0.5 | 2013-08-29 | Add support for second CAN interface available on HW Rev. 1.10 |
| | | | 0001859 | | | minor | resolved | V0.5 | V0.5 | 2013-08-29 | Correct IntPullup value usage |
| | | | 0001830 | | | minor | resolved | V0.5 | V0.5 | 2013-08-28 | IO44, IO43, and IO45 are not accessible correctly |
| | | | 0001849 | | | minor | resolved | V1.13 | V1.13 | 2013-08-21 | Include resistor between both touch films into the sample algorithm |
| | | | 0001842 | | | minor | resolved | iMX6-V1.1 | iMX6-V1.1 | 2013-08-20 | Integrate release version modules into rootfs image |
| | | | 0001848 | | | minor | resolved | iMX6-V1.1 | iMX6-V1.1 | 2013-08-15 | Correct revision detection |
| | | | 0001846 | | | minor | resolved | iMX6-V1.1 | iMX6-V1.1 | 2013-08-14 | Add X11 display driver |
| | | | 0001822 | | | feature | resolved | V0.5 | V0.5 | 2013-08-09 | Add support for PWM |
| | | | 0001833 | | | minor | resolved | V0.5 | V0.5 | 2013-08-09 | Add stream driver support for all external touch controllers (mxt224, EDT, SX8655) |
| | | | 0001809 | | | feature | resolved | V0.5 | V0.5 | 2013-08-09 | Add support for resistive touch |
| | | | 0001821 | | | feature | resolved | V0.5 | V0.5 | 2013-08-08 | Add support for AnalogIn |
| | | | 0001844 | | | minor | resolved | V0.5 | V0.5 | 2013-08-07 | Set BPP=16 and LCDPortDriveStrength=1 as default |
| | | | 0001806 | | | minor | resolved | V0.5 | V0.5 | 2013-08-07 | Add support for 16BPP frame buffer organization |
| | | | 0001843 | | | feature | resolved | V0.5 | V0.5 | 2013-08-07 | Add support for registry value LCDPortDriveStrength |
| | | | 0001841 | | | minor | resolved | V0.5 | V0.5 | 2013-08-06 | Background color of buttons don't work |
| | | | 0001840 | | | minor | resolved | iMX6-V1.1 | iMX6-V1.1 | 2013-08-06 | blackbox window manager causes "Segmentation fault" |
| | | | 0001839 | | | minor | resolved | V0.5 | V0.5 | 2013-08-02 | Add new CheckAutoStart.exe |
| | | | 0001838 | | | minor | resolved | V1.6 | V1.6 | 2013-08-02 | Read wrong board name |
| | | | 0001837 | | | minor | resolved | iMX6-V1.1 | iMX6-V1.1 | 2013-08-02 | Add U-BOOT pattern to detect image type in Nboot |
| | | | 0001835 | | | minor | resolved | V0.5 | V0.5 | 2013-07-31 | Adapt Shell Folder einvironment variables compatibel to PicoCOM2 |
| | | | 0001834 | | | minor | resolved | V0.5 | V0.5 | 2013-07-31 | Only one instance of (software) I2C driver possible yet. |
